Getting Started with CM4 - Revision history

Dangku: /* WiringPi2-Python */

2024-07-05T08:14:45Z

‎WiringPi2-Python

2024-07-05T08:14:23Z

‎RPi.GPIO

2024-07-05T08:14:02Z

‎WiringPi

2024-07-05T08:10:56Z

‎WiringPi

2023-06-05T06:02:17Z

2023-06-05T06:01:34Z

2023-06-05T06:00:06Z

2023-03-17T10:34:44Z

‎DTB overlay

2023-03-17T10:34:34Z

‎DTB overlay

2023-03-17T10:34:18Z

‎DTB overlay

@@ Line 465: / Line 465: @@
    $ sudo python setup.py build install
-===WiringPi2-Python===
+===WiringPi-Python===
 : Build and install, for debian, you must [https://wiki.banana-pi.org/Getting_Started_with_M5/M2Pro#Enable_sudo_for_Debian install sudo] before build
    $ sudo apt-get update
    $ sudo apt-get install build-essential python python-dev python-setuptools swig git
-   $ git clone --recursive  https://github.com/Dangku/WiringPi2-Python-Amlogic.git
+   $ git clone --recursive  https://github.com/Dangku/WiringPi-Python.git
-   $ cd WiringPi2-Python-Amlogic
+   $ cd WiringPi-Python
    $ sudo python setup.py install

@@ Line 460: / Line 460: @@
    $ sudo apt-get update
    $ sudo apt-get install build-essential python python-dev python-setuptools git
-   $ git clone https://github.com/Dangku/RPi.GPIO-Amlogic.git
+   $ git clone https://github.com/Dangku/RPi.GPIO.git
-   $ cd RPi.GPIO-Amlogic
+   $ cd RPi.GPIO
    $ sudo python setup.py clean --all
    $ sudo python setup.py build install

@@ Line 449: / Line 449: @@
 :3. BPI GPIO Extend board and examples in [https://github.com/Dangku/WiringPi/tree/master/examples WiringPi/examples]
-:[https://github.com/Dangku/amlogic-wiringPi/blob/master/examples/blinkall.c blinkall], blink all pin header gpios, no extend board.
+:blinkall, blink all pin header gpios, no extend board.
-:[https://github.com/Dangku/amlogic-wiringPi/blob/master/examples/lcd-bpi.c lcd1602-pi], [http://wiki.banana-pi.org/BPI_LCD_1602_display_module BPI LCD 1602 display module] example.
+:lcd-adafruit, [http://wiki.banana-pi.org/BPI_LCD_1602_display_module BPI LCD 1602 display module] example.
-:[https://github.com/Dangku/amlogic-wiringPi/blob/master/examples/52pi-bpi.c 52pi-bpi], [http://wiki.banana-pi.org/BPI_OLED_Display_Module BPI OLED Display Module] example.
+:oled, [http://wiki.banana-pi.org/BPI_OLED_Display_Module BPI OLED Display Module] example.
-:[https://github.com/Dangku/amlogic-wiringPi/blob/master/examples/matrixled-bpi.c matrixled-bpi], [http://wiki.banana-pi.org/BPI_RGB_LED_Matrix_Expansion_Module BPI RGB LED Matrix Expansion Module] example.
+:matrixled, [http://wiki.banana-pi.org/BPI_RGB_LED_Matrix_Expansion_Module BPI RGB LED Matrix Expansion Module] example.
-:[https://github.com/Dangku/amlogic-wiringPi/blob/master/examples/berryclip-bpi.c berryclip-bpi], [http://wiki.banana-pi.org/BPI_BerryClip_Module BPI BerryClip Module]
+:berryclip, [http://wiki.banana-pi.org/BPI_BerryClip_Module BPI BerryClip Module]
 ===RPi.GPIO===

@@ Line 439: / Line 439: @@
    $ sudo apt-get update
    $ sudo apt-get install build-essential git
-   $ git clone https://github.com/Dangku/amlogic-wiringPi
+   $ git clone https://github.com/Dangku/WiringPi
-   $ cd amlogic-wiringPi
+   $ cd WiringPi
    $ chmod a+x build
    $ sudo ./build
@@ Line 447: / Line 447: @@
 [[File:cm4_wiringpi.png]]
-:3. BPI GPIO Extend board and examples in [https://github.com/Dangku/amlogic-wiringPi/tree/master/examples amlogic-wiringPi/examples]
+:3. BPI GPIO Extend board and examples in [https://github.com/Dangku/WiringPi/tree/master/examples WiringPi/examples]
 :[https://github.com/Dangku/amlogic-wiringPi/blob/master/examples/blinkall.c blinkall], blink all pin header gpios, no extend board.

@@ Line 3: / Line 3: @@
 [[File:Banana_Pi_BPI-CM4_1.jpg|thumb|[[Banana Pi BPI-CM4]] with A311D design]]
 [[File:Banana_Pi_BPI-CM4_2.jpg|thumb|[[BPI-CM4 Computer module and development Kit]] with A311D design]]
 [[File:Banana_Pi_BPI-M5_4.JPG|thumb|[[Banana Pi BPI-M5]] with S905x3 design]]
 [[File:BPI-M2_Pro_2.jpg|thumb|[[Banana Pi BPI-M2 Pro]] S905x3 design]]

← Older revision		Revision as of 06:00, 5 June 2023
Line 1:		Line 1:
	=Introduction=		=Introduction=
		+
		+	[[File:Banana_Pi_BPI-CM4_1.jpg\|thumb\|[[Banana Pi BPI-CM5]] with A311D design]]
		+	[[File:Banana_Pi_BPI-CM4_2.jpg\|thumb\|[[BPI-CM4 Computer module and development Kit]] with A311D design]]
		+	[[File:Banana_Pi_BPI-M5_4.JPG\|thumb\|[[Banana Pi BPI-M5]] with S905x3 design]]
		+	[[File:BPI-M2_Pro_2.jpg\|thumb\|[[Banana Pi BPI-M2 Pro]] S905x3 design]]
		+	[[File:Banana_Pi_BPI-M2S_1.jpg\|thumb\|[[Banana Pi BPI-M2S]] Amlogic A311D/S922 chip]]
		+
	BananaPi BPI-CM4 new design with Amlogic A311D Quad core ARM Cortex-A73 and dual core ARM Cortex-A53 CPU ,ARM G52 MP4(6EE) GPU,NPU for AI at 5.0 TOPS, support Camera and MIPI-CSI interface ,HDMI output,2 Gigabit port . 4G RAM and 16 GB eMMC flash.		BananaPi BPI-CM4 new design with Amlogic A311D Quad core ARM Cortex-A73 and dual core ARM Cortex-A53 CPU ,ARM G52 MP4(6EE) GPU,NPU for AI at 5.0 TOPS, support Camera and MIPI-CSI interface ,HDMI output,2 Gigabit port . 4G RAM and 16 GB eMMC flash.

@@ Line 324: / Line 324: @@
    i2c2.dtbo          pwm_cd-c.dtbo      spi0_flash.dtbo    wifi_bt_rtl8822cs.dtbo
    i2s.dtbo           pwm_cd.dtbo        uart1_cts_rts.dtbo i2smic.dtbo
-   pwm_ef.dtbo        uart1.dtbo         os08a10.dtbo       pwm_ef-f.dtbo   uart2.dtbo
+   pwm_ef.dtbo        uart1.dtbo         os08a10.dtbo     pwm_ef-f.dtbo   uart2.dtbo
 :2. Update the overlays env in vfat /boot/env.txt to enable what you want.

@@ Line 320: / Line 320: @@
 :1. DTB overlay is used for 40pin gpios multi-function configuration and install in vfat boot partition, you can check the mount point with mount command.
    root@bananapi:~# ls /boot/overlays/
-   hifi_pcm5122.dtbo  pdmmic.dtbo        sdio.dtbo          waveshare_tft24_lcd.dtbo
+   hifi_pcm5122.dtbo  pdmmic.dtbo        sdio.dtbo        waveshare_tft24_lcd.dtbo
-   i2c1.dtbo          pwm_c-beeper.dtbo  spi0.dtbo          waveshare_tft35c_lcd.dtbo
+   i2c1.dtbo          pwm_c-beeper.dtbo  spi0.dtbo        waveshare_tft35c_lcd.dtbo
    i2c2.dtbo          pwm_cd-c.dtbo      spi0_flash.dtbo    wifi_bt_rtl8822cs.dtbo
    i2s.dtbo           pwm_cd.dtbo        uart1_cts_rts.dtbo i2smic.dtbo