Getting Started with BPI-R3 - Revision history

Squy: /* Prepare to develop */

2024-05-06T02:02:08Z

Prepare to develop

← Older revision		Revision as of 02:02, 6 May 2024
Line 31:		Line 31:
	* User name/password: '''pi/bananapi''' ,'''root/bananapi'''.		* User name/password: '''pi/bananapi''' ,'''root/bananapi'''.
	Or the user is '''root without a password'''.		Or the user is '''root without a password'''.
	* WIFI: '''~~Operwrt~~'''		* WIFI: '''MTK_MT7986_AP_AX6000_2.4G'''and'''MTK_MT7986_AP_AX6000_5G'''
	[[Image:R3_debug_console.jpg\|320px]]		[[Image:R3_debug_console.jpg\|320px]]

Squy: /* Prepare to develop */

2024-01-04T08:20:37Z

Prepare to develop

← Older revision		Revision as of 08:20, 4 January 2024
Line 27:		Line 27:
	* Prepare 8G/above TF card, USB-Serial interface, Ubuntu System		* Prepare 8G/above TF card, USB-Serial interface, Ubuntu System
	* Using your USB-Serial Connect debug console on BPI-R3		* Using your USB-Serial Connect debug console on BPI-R3
			Note: '''Debug Uart 3.3v TTL,Baud: 115200'''.
			* Default IP address for LAN port: '''192.168.1.1'''
			* User name/password: '''pi/bananapi''' ,'''root/bananapi'''.
			Or the user is '''root without a password'''.
			* WIFI: '''Operwrt'''
	[[Image:R3_debug_console.jpg\|320px]]		[[Image:R3_debug_console.jpg\|320px]]

Sinovoip: /* How to burn image to SD card */

2023-12-22T12:30:54Z

How to burn image to SD card

← Older revision		Revision as of 12:30, 22 December 2023
Line 65:		Line 65:
	[[Image:BPI-R3-Jumper-ALL-High.png\|320px]]		[[Image:BPI-R3-Jumper-ALL-High.png\|320px]]

	====How to burn image to onboard eMMC====		===How to burn image to onboard eMMC===
	Note: because SD card and EMMC device share one SOC's interface, you need flash one SD image firstly, then R3 boot from SD card, then flash nand image into Nand, then change boot strap to boot from nand, you need flash EMMC image into EMMC. Finally you change bootstrap to boot from EMMC.		Note: because SD card and EMMC device share one SOC's interface, you need flash one SD image firstly, then R3 boot from SD card, then flash nand image into Nand, then change boot strap to boot from nand, you need flash EMMC image into EMMC. Finally you change bootstrap to boot from EMMC.

Sinovoip: /* Key Features */

2023-07-26T03:06:22Z

Key Features

← Older revision		Revision as of 03:06, 26 July 2023
Line 12:		Line 12:
	==Key Features==		==Key Features==

	*. MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53~~+MT7531 chip design~~		* MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53
	*. Wifi 6~~/6E 4x4~~ 2.4G ~~Wifi(MT7975N) +4x4 5G Wifi(MT7975P)~~		* Wifi 6 2.4G/5G（MT7976C）
	*. 2G DDR RAM		* 2G DDR RAM
	*. 8G eMMC flash		* 8G eMMC flash
	*~~. 2 SFP~~ 2.5GbE		* 128MB Nand flash
	*. 5 GbE network port		* 2x 2.5GbE network port
	*. ~~POE support (optional)~~		* 1x M.2 Key B USB inerface
	*. Mini PCIe via USB		* 1x M.2 KEY M PCIe inerface
	*. M.2 KEY-E PCIe inerface		* 1x USB2.0 interface
	*. ~~Mciro SD card~~ interface
	*. 26 PIN GPIO

	=Development=		=Development=

Sinovoip: /* MediaTek MT7986(Filogic 830) */

2023-07-26T03:06:01Z

MediaTek MT7986(Filogic 830)

← Older revision		Revision as of 03:06, 26 July 2023
Line 6:		Line 6:
	==MediaTek MT7986(Filogic 830)==		==MediaTek MT7986(Filogic 830)==

	The MT7986(Filogic 830) integrates four Arm Cortex-A53 cores up to 2GHz with up to 18,000 DMIPs of processing power and 6Gbps of dual 4x4 Wi-~~Fi 6/6E~~ connectivity. It has two 2.5g Ethernet interfaces and serial peripheral interfaces (SPI). Filogic 830‘s built-in hardware acceleration engine enables fast and reliable Wi-Fi offloading and wireless network connection. In addition, the chip supports Mediatek FastPath™ technology, which is suitable for games, AR/VR and other low-latency ~~applications.~~		The MT7986(Filogic 830) integrates four Arm Cortex-A53 cores up to 2GHz with up to 18,000 DMIPs of processing power and 6Gbps of dual 4x4 Wi-Fi6 connectivity. It has two 2.5g Ethernet interfaces and serial peripheral interfaces (SPI). Filogic 830‘s built-in hardware acceleration engine enables fast and reliable Wi-Fi offloading and wireless network connection. In addition, the chip supports Mediatek FastPath™ technology, which is suitable for games, AR/VR and other low-latency applications.

	Wi-fi 6E has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. Wireless network devices supporting the 6GHz band mainly use 160MHz wide channel and 6GHz uncongested bandwidth to provide multigigabit transmission and low-latency wi-fi connection, providing reliable wireless network for streaming media, games, AR/VR and other applications.

			Wi-fi 6 has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. Wireless network devices supporting the 6GHz band mainly use 160MHz wide channel and 6GHz uncongested bandwidth to provide multigigabit transmission and low-latency wi-fi connection, providing reliable wireless network for streaming media, games, AR/VR and other applications.

	==Key Features==		==Key Features==

Sinovoip: /* Introduction */

2023-07-26T03:05:31Z

Introduction

← Older revision		Revision as of 03:05, 26 July 2023
Line 1:		Line 1:
	[[zh:快速上手香蕉派 BPI-R3]]		[[zh:快速上手香蕉派 BPI-R3]]
	==Introduction==		==Introduction==
	~~[[File:Banana_pi_751.jpg]]~~

	Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 ~~+ MT7531A~~ chip design ,2G DDR RAM ,8G eMMC flash onboard,It is a very high performance open source router development board,support Wi-~~Fi 6/6E~~ 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 ~~SFP~~ 2.5GbE ~~port, and 5 GbE~~ network port.		Banana Pi BPI-R3 Mini Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 chip design ,2G DDR RAM ,8G eMMC flash onboard,It is a very high performance open source router development board,support Wi-Fi6 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 2.5GbE network port.

	==MediaTek MT7986(Filogic 830)==		==MediaTek MT7986(Filogic 830)==

Czj: /* TTL */

2023-02-27T01:50:12Z

TTL

← Older revision		Revision as of 01:50, 27 February 2023
Line 292:		Line 292:
	*MT7986a Reference Manual for Develope Board(BPi)		*MT7986a Reference Manual for Develope Board(BPi)
	::Google Drive：https://drive.google.com/file/d/1biSJmxnIpNzQroYDg9mtPtSTAv4i0DFf/view?usp=sharing		::Google Drive：https://drive.google.com/file/d/1biSJmxnIpNzQroYDg9mtPtSTAv4i0DFf/view?usp=sharing
	===TTL===		===TTL Voltage===
	:: The debug-uart TTL is tolerant to 3.3V.		:: The debug-uart TTL is tolerant to 3.3V.

Czj: /* FAQ */

2023-02-27T01:49:29Z

FAQ

← Older revision		Revision as of 01:49, 27 February 2023
Line 292:		Line 292:
	*MT7986a Reference Manual for Develope Board(BPi)		*MT7986a Reference Manual for Develope Board(BPi)
	::Google Drive：https://drive.google.com/file/d/1biSJmxnIpNzQroYDg9mtPtSTAv4i0DFf/view?usp=sharing		::Google Drive：https://drive.google.com/file/d/1biSJmxnIpNzQroYDg9mtPtSTAv4i0DFf/view?usp=sharing
			===TTL===
			:: The debug-uart TTL is tolerant to 3.3V.

	='''Reference Link'''=		='''Reference Link'''=

	http://forum.banana-pi.org/		http://forum.banana-pi.org/

Czj: /* Wifi & Serial cable */

2023-02-08T08:52:32Z

Wifi & Serial cable

← Older revision		Revision as of 08:52, 8 February 2023
Line 287:		Line 287:
	'''UART_TX0 is the Boot Strapping PIN and must be kept low during power-on.'''		'''UART_TX0 is the Boot Strapping PIN and must be kept low during power-on.'''

	[[~~Image~~:Strapping.png\|720px]]		[[File:Strapping.png\|720px]]

	==FAQ==		==FAQ==

Sinovoip: /* Wifi & Serial cable */

2023-02-03T07:00:44Z

Wifi & Serial cable

← Older revision		Revision as of 07:00, 3 February 2023
Line 286:		Line 286:
	'''		'''
	'''UART_TX0 is the Boot Strapping PIN and must be kept low during power-on.'''		'''UART_TX0 is the Boot Strapping PIN and must be kept low during power-on.'''

	[[Image:Strapping.png\|720px]]		[[Image:Strapping.png\|720px]]