BPI Uno Compatible Module - Revision history

Sinovoip at 13:06, 16 May 2018

2018-05-16T13:06:15Z

Sinovoip at 13:00, 16 May 2018

2018-05-16T13:00:31Z

Sinovoip: Created page with "# BPI Uno Compatible Module ![](bpi uno 1.JPG) Product Specification： ![](uno1.png) Produce Overview： The module makes Banana Pi compatible with Arduino Uno a..."

2018-05-16T12:59:10Z

Created page with "# BPI Uno Compatible Module ![](bpi uno 1.JPG) **Product Specification：** ![](uno1.png) **Produce Overview：** The module makes Banana Pi compatible with Arduino Uno a..."

New page

#
BPI Uno Compatible Module

![](bpi uno 1.JPG)

**Product Specification：**

![](uno1.png)

**Produce Overview：**

The module makes Banana Pi compatible with Arduino Uno and many Arduino Shields. There is an ATmega328 chip on the board so the module can compatible Arduino Uno code and peripheral. This board is a combination of high operation performance of the banana pie and Arduino flexible control performance, the combination of peripheral greatly expand the banana pie access ability and the abundance of accessories.

**Produce Features：**

1. ATmega328 chip on module
2. Compatible with Arduino Uno
3. Switch 5V or 3.3V GPIO
4. Compatible with Processing code
5. Expand SPI of Banana Pi

**Port：**

1. Banana Pi connection
2. Banana Pi cascade port
3. Arduino Uno GPIO
4. Electric level switch jumper
5. SPI
6. ICSP port

**Product Parameters：**

1. Working voltage: 3.3V-4.5V
2. GPIO voltage: 3.3V or 5.5
3. 8 channel 10bit high resolution ADC
4. Power-down Mode: 0.1µA
5. 32K ROM
6. 2K RAM
7. −40°C to +85°C operation

**Typical Application：**

1. Automatic control
2. Arduino learning
3. Sensor control
4. 3D printer controller
5. Laser cutter controller
6. Robot controller
7. Smart home

**How to use on BPI-M1:**

Just insert the module to Banana Pi, like the below picture:

![](bpi+uno.jpg)

**More information：**

pin define:

![](uno2.png)

Schematic diagram：

![](uno3.png)

**More information please check：**

http://www.atmel.com/zh/cn/devices/atmega328.aspx

**Testbench：**

1. When power up the module , The “L” LED is blinking

@@ Line 6: / Line 6: @@
 The module makes Banana Pi compatible with Arduino Uno and many Arduino Shields. There is an ATmega328 chip on the board so the module can compatible Arduino Uno code and peripheral. This board is a combination of high operation performance of the banana pie and Arduino flexible control performance, the combination of peripheral greatly expand the banana pie access ability and the abundance of accessories.
-**Produce Features：**
+==Produce Features==
-. ATmega328 chip on module
+*1. ATmega328 chip on module
-. Compatible with Arduino Uno
+*2. Compatible with Arduino Uno
-. Switch 5V or 3.3V GPIO
+*3. Switch 5V or 3.3V GPIO
-. Compatible with Processing code
+*4. Compatible with Processing code
-. Expand SPI of Banana Pi
+*5. Expand SPI of Banana Pi
-**Port：**
+==Port==
-. Banana Pi connection
+*1. Banana Pi connection
-. Banana Pi cascade port
+*2. Banana Pi cascade port
-. Arduino Uno GPIO
+*3. Arduino Uno GPIO
-. Electric level switch jumper
+*4. Electric level switch jumper
-. SPI
+*5. SPI
-. ICSP port
+*6. ICSP port
-![](uno1.png)
+==Product Specification==
-**Product Parameters：**
+==Product Parameters==
-. Working voltage: 3.3V-4.5V
+*1. Working voltage: 3.3V-4.5V
-. GPIO voltage: 3.3V or 5.5
+*2. GPIO voltage: 3.3V or 5.5
-. 8 channel 10bit high resolution ADC
+*3. 8 channel 10bit high resolution ADC
-. Power-down Mode: 0.1µA
+*4. Power-down Mode: 0.1µA
-. 32K ROM
+*5. 32K ROM
-. 2K RAM
+*6. 2K RAM
-. −40°C to +85°C operation
+*7. −40°C to +85°C operation
-**Typical Application：**
+==Typical Application==
-. Automatic control
+*1. Automatic control
-. Arduino learning
+*2. Arduino learning
-. Sensor control
+*3. Sensor control
-. 3D printer controller
+*4. 3D printer controller
-. Laser cutter controller
+*5. Laser cutter controller
-. Robot controller
+*6. Robot controller
-. Smart home
+*7. Smart home
-**How to use on BPI-M1:**
+==More information==
-Just insert the module to Banana Pi, like the below picture:
+pin define:
-![](bpi+uno.jpg)
+[[File:Uno2.png]]
-**More information：**
+Schematic diagram：
-pin define:
+[[File:Uno3.png]]
-![](uno2.png)
+==Testbench==
-Schematic diagram：
+. When power up the module , The “L” LED is blinking
-![](uno3.png)
+=How to use on BPI-M1=
-**More information please check：**
+Just insert the module to Banana Pi, like the below picture:
-. When power up the module , The “L” LED is blinking
+*More information please check ： http://www.atmel.com/zh/cn/devices/atmega328.aspx

@@ Line 1: / Line 1: @@
-![](bpi uno 1.JPG)
+=Produce Overview=
-**Product Specification：**
+[[File:Bpi_uno_1.JPG|thumb|Overview ]]
 The module makes Banana Pi compatible with Arduino Uno and many Arduino Shields. There is an ATmega328 chip on the board so the module can compatible Arduino Uno code and peripheral. This board is a combination of high operation performance of the banana pie and Arduino flexible control performance, the combination of peripheral greatly expand the banana pie access ability and the abundance of accessories.
@@ Line 28: / Line 22: @@
 . SPI
 . ICSP port

BPI Uno Compatible Module - Revision history

Sinovoip at 13:06, 16 May 2018

Sinovoip at 13:00, 16 May 2018

Sinovoip: Created page with "# BPI Uno Compatible Module ![](bpi uno 1.JPG) **Product Specification：** ![](uno1.png) **Produce Overview：** The module makes Banana Pi compatible with Arduino Uno a..."

Sinovoip: Created page with "# BPI Uno Compatible Module ![](bpi uno 1.JPG) Product Specification： ![](uno1.png) Produce Overview： The module makes Banana Pi compatible with Arduino Uno a..."