快速上手 M1 - Revision history

Sinovoip: Blanked the page

2018-10-27T04:46:29Z

Blanked the page

← Older revision		Revision as of 04:46, 27 October 2018
Line 1:		Line 1:
	~~[[en:Getting_Started_with_M1]]~~
	~~=介绍=~~
	~~==BPI-M1==~~
	~~[[File:BPI-m1_respbian.png\|thumb\|Overview: BPI-M1 respbian linux]]~~
	~~[[File:BPI-m1_debian.jpg\|thumb\|Overview: BPI-M1 debian linux]]~~
	~~[[File:BPI-m1_ubutnu.jpg\|thumb\|Overview: BPI-M1 ubuntu linux]]~~

	香蕉派M1是我们的第一个产品，我们的目标是创建一个开源开发板社区。使用香蕉派，我们希望你去探索和体验DIY项目和便携式计算的世界。我们欢迎社区里所有的公司、DIY爱好者和热爱科技的人！我们可以一起改变，我们可以发现我们的激情，激励他人，并建立一个切实可行的项目。

	*关于更多 : [[Banana Pi BPI-M1]]

	~~===关键特性===~~
	* 4核 1.0GHz CPU
	* 1 GB DDR3 内存
	* Mali-400 MP2 和 Open GL ES 2.0/1.1

	~~=开发Android=~~
	~~===烧录第一个Android镜像到M1===~~
	~~1.首先从论坛上下载最近的镜像.~~
	~~Ex:http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-android-and-ubuntu-sever-release-2018-07-28/6357~~

	~~2.准备一张容量不低于8Gb的TF卡, 然后插到你PC上的USB接口中.~~

	~~3.下载烧录工具 PhoenixCard.exe.~~
	* Download PhoenixCard: https://pan.baidu.com/s/18Fo_JhYY02gmxtFw2Ps3rQ

	~~4.使用 "PhoenixCard.exe" 来烧录Android镜像到TF卡上.~~

	~~[[Image:M3_Android_Burning.png \| 600px]]~~

	~~===如何编译 M1 Bsp 代码===~~
	* 准备一台运行Ubuntu系统的电脑
	* 安装 Docker-ce 在你的电脑上, https://docs.docker.com/install/linux/docker-ce/ubuntu/#install-docker-ce
	* 安装完成后执行命令 "docker pull sinovoip/bpi-build-android:a20_01", 下载docker镜像
	* 下载完docker镜像后, 运行命令启动docker镜像 "docker run --privileged -d -p 2223:22 -v /media:/media sinovoip/bpi-build-android:a20_01"
	* 运行命令"ssh -p 2223 root@127.0.0.1"进入到docker镜像中, 默认密码是root
	* 进入到docker镜像后, 运行命令 "git clone https://github.com/BPI-SINOVOIP/BPI-M1-bsp.git"下载M1的Bsp代码
	* 运行命令 "./build.sh" 编译M1代码
	* 编译完成后，可以运行代码 "docker cp xxxxx(your container id):xxxxx(your project path) xxxxx(your pc path)" 来拷贝结果到容器外的Ubuntu系统中

	~~[[Image:docker_operate.png]]~~

	~~=开发 Linux=~~
	~~==基础开发==~~
	~~===开发前的准备===~~
	* 准备一张容量不低于8Gb的TF卡, USB-Serial 串口线, 一台运行Ubuntu系统的PC机
	* 使用你的串口线去连接M1的调试串口

	~~[[Image:M1_uart_pins.png \| 600px]]~~

	~~[[Image:M1_console_interface.png \| 600px]]~~

	~~===烧录第一个Linux镜像到 M1===~~
	~~1.你可以从下面链接下载最近的镜像~~
	* http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-android-and-ubuntu-sever-release-2018-07-28/6357

	~~2.在你的Ubuntu系统电脑上安装bpi-tools, 执行以下命令即可安装：~~
	* apt-get install pv
	* curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools \| sudo -E bash

	~~3.下载完镜像后, 插入TF卡到你的Ubuntu电脑中~~
	* 运行命令 "bpi-copy xxx.img /dev/sdx" 烧录镜像到你的TF卡中.

	~~4.烧录完成后, 把TF卡插到M1中, 按住M1的电源键启动M1.~~

	~~===如何更新你的镜像===~~
	~~你可以按照步骤执行以下命令来更新你的镜像：~~

	* 运行命令“bpi-tools”, to update your bpi tools;
	* 运行命令“bpi-update -c bpi-m1.conf”, to download new driver to update your image
	* 运行命令“file *.tgz”, to check download files’ type is compressed data
	* 运行命令“bpi-bootsel”, you will see the bootloader path, “/usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”
	* 运行命令“bpi-bootsel /usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”, to update your bootloader
	* 重启M1

JackZengWiki: /* Update your image */

2018-10-12T06:42:10Z

Update your image

← Older revision		Revision as of 06:42, 12 October 2018
Line 64:		Line 64:
	4.烧录完成后, 把TF卡插到M1中, 按住M1的电源键启动M1.		4.烧录完成后, 把TF卡插到M1中, 按住M1的电源键启动M1.

	===~~Update your image~~===		===如何更新你的镜像===
	* ~~execute “bpi~~-tools”, to update your bpi tools;		你可以按照步骤执行以下命令来更新你的镜像：
	* ~~execute “bpi~~-update -c bpi-m1.conf”, to download new driver to update your image
	* ~~execute “file~~ *.tgz”, to check download files’ type is compressed data		* 运行命令“bpi-tools”, to update your bpi tools;
	* ~~execute “bpi~~-bootsel”, you will see the bootloader path, “/usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”		* 运行命令“bpi-update -c bpi-m1.conf”, to download new driver to update your image
	* ~~execute “bpi~~-bootsel /usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”, to update your bootloader		* 运行命令“file *.tgz”, to check download files’ type is compressed data
	* ~~reboot~~		* 运行命令“bpi-bootsel”, you will see the bootloader path, “/usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”
			* 运行命令“bpi-bootsel /usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”, to update your bootloader
			* 重启M1

JackZengWiki: /* 烧录第一个Linux镜像到 M1 */

2018-10-12T06:40:56Z

烧录第一个Linux镜像到 M1

← Older revision		Revision as of 06:40, 12 October 2018
Line 52:		Line 52:

	===烧录第一个Linux镜像到 M1===		===烧录第一个Linux镜像到 M1===
	1.~~You could download latest image from our forum~~		1.你可以从下面链接下载最近的镜像
	* ~~Here is the example link~~:		* http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-android-and-ubuntu-sever-release-2018-07-28/6357

	2.~~Install bpi~~-tools ~~on your system~~		2.在你的Ubuntu系统电脑上安装bpi-tools, 执行以下命令即可安装：
	* apt-get install pv		* apt-get install pv
	* curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools \| sudo -E bash		* curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools \| sudo -E bash

	3.~~After you download the image~~, ~~insert your TF card into your Ubuntu~~		3.下载完镜像后, 插入TF卡到你的Ubuntu电脑中
	* ~~Execute~~ "bpi-copy xxx.img /dev/sdx" ~~to install image on your TF card~~.		* 运行命令 "bpi-copy xxx.img /dev/sdx" 烧录镜像到你的TF卡中.

	4.~~After step 3~~, ~~then you can insert your TF card into M1~~, ~~and press power button setup M1~~		4.烧录完成后, 把TF卡插到M1中, 按住M1的电源键启动M1.

	===Update your image===		===Update your image===

JackZengWiki: /* 开发Android */

2018-10-12T06:38:10Z

开发Android

← Older revision		Revision as of 06:38, 12 October 2018
Line 16:		Line 16:

	=开发Android=		=开发Android=
	===~~烧录第一个镜像到M1~~===		===烧录第一个Android镜像到M1===
	1.首先从论坛上下载最近的镜像.		1.首先从论坛上下载最近的镜像.
	Ex:http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-android-and-ubuntu-sever-release-2018-07-28/6357		Ex:http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-android-and-ubuntu-sever-release-2018-07-28/6357

JackZengWiki: /* Development For Linux */

2018-10-12T06:37:46Z

Development For Linux

← Older revision		Revision as of 06:37, 12 October 2018
Line 41:		Line 41:
	[[Image:docker_operate.png]]		[[Image:docker_operate.png]]

	=~~Development For~~ Linux=		=开发 Linux=
	~~Let's get start to develop on BPI-M1, see amazing things happen.~~		==基础开发==
	==~~Basic Development~~==		===开发前的准备===
	===~~Prepare to develop~~===		* 准备一张容量不低于8Gb的TF卡, USB-Serial 串口线, 一台运行Ubuntu系统的PC机
	* ~~Prepare 8G/above TF card~~, USB-Serial ~~interface~~, ~~PC with Ubuntu System~~		* 使用你的串口线去连接M1的调试串口
	* ~~Using your USB-Serial Connect debug console on M1~~

	[[Image:M1_uart_pins.png \| 600px]]		[[Image:M1_uart_pins.png \| 600px]]
Line 52:		Line 51:
	[[Image:M1_console_interface.png \| 600px]]		[[Image:M1_console_interface.png \| 600px]]

	===~~Load your first image on~~ M1===		===烧录第一个Linux镜像到 M1===
	1.You could download latest image from our forum		1.You could download latest image from our forum
	* Here is the example link:		* Here is the example link:

JackZengWiki: /* Development For Android */

2018-10-12T06:35:14Z

Development For Android

← Older revision		Revision as of 06:35, 12 October 2018
Line 15:		Line 15:
	* Mali-400 MP2 和 Open GL ES 2.0/1.1		* Mali-400 MP2 和 Open GL ES 2.0/1.1

	=~~Development For Android~~=		=开发Android=
	===~~Load your first image on M1~~===		===烧录第一个镜像到M1===
	1.~~You could download latest image from our forum~~.		1.首先从论坛上下载最近的镜像.
	Ex:		Ex:http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-android-and-ubuntu-sever-release-2018-07-28/6357

	2.~~Put your TF card into a TF-USB adapter~~, ~~and then plug adapter in your Windows PC usb interface~~.		2.准备一张容量不低于8Gb的TF卡, 然后插到你PC上的USB接口中.

	3.~~Prepare your image, and download image burning tools~~ PhoenixCard.exe.		3.下载烧录工具 PhoenixCard.exe.
			* Download PhoenixCard: https://pan.baidu.com/s/18Fo_JhYY02gmxtFw2Ps3rQ
	4.~~Use~~ "PhoenixCard.exe" ~~to burn android image to TF card~~.
			4.使用 "PhoenixCard.exe" 来烧录Android镜像到TF卡上.

	[[Image:M3_Android_Burning.png \| 600px]]		[[Image:M3_Android_Burning.png \| 600px]]

	* Download PhoenixCard: https://pan.baidu.com/s/18Fo_JhYY02gmxtFw2Ps3rQ		===如何编译 M1 Bsp 代码===
			* 准备一台运行Ubuntu系统的电脑
	===~~How to buld~~ M1 Bsp ~~code~~===		* 安装 Docker-ce 在你的电脑上, https://docs.docker.com/install/linux/docker-ce/ubuntu/#install-docker-ce
	* ~~Prepare a PC which runs ubuntu~~		* 安装完成后执行命令 "docker pull sinovoip/bpi-build-android:a20_01", 下载docker镜像
	* ~~Install~~ Docker-ce ~~on your PC，https~~://docs.docker.com/install/linux/docker-ce/ubuntu/#install-docker-ce		* 下载完docker镜像后, 运行命令启动docker镜像 "docker run --privileged -d -p 2223:22 -v /media:/media sinovoip/bpi-build-android:a20_01"
	* ~~After install Docker, execute~~ "docker pull sinovoip/bpi-build-android:a20_01", ~~to pull image~~		* 运行命令"ssh -p 2223 root@127.0.0.1"进入到docker镜像中, 默认密码是root
	* ~~Then you pulled image~~, ~~execute~~ "docker run --privileged -d -p 2223:22 -v /media:/media sinovoip/bpi-build-android:a20_01"		* 进入到docker镜像后, 运行命令 "git clone https://github.com/BPI-SINOVOIP/BPI-M1-bsp.git"下载M1的Bsp代码
	* "ssh -p 2223 root@127.0.0.1 ~~#default passwd is root~~"		* 运行命令 "./build.sh" 编译M1代码
	* ~~Execute~~ "git clone https://github.com/BPI-SINOVOIP/BPI-M1-bsp.git" ~~on your ubuntu terminal~~		* 编译完成后，可以运行代码 "docker cp xxxxx(your container id):xxxxx(your project path) xxxxx(your pc path)" 来拷贝结果到容器外的Ubuntu系统中
	* ~~Execute~~ "./build.sh" ~~to build M1 bsp code~~
	* ~~After built, open a new terminal, execute~~ "docker cp xxxxx(your container id):xxxxx(your project path) xxxxx(your pc path)"

	[[Image:docker_operate.png]]		[[Image:docker_operate.png]]

JackZengWiki: /* Introduction */

2018-10-12T06:25:04Z

Introduction

← Older revision		Revision as of 06:25, 12 October 2018
Line 1:		Line 1:
	[[en:Getting_Started_with_M1]]		[[en:Getting_Started_with_M1]]
	=~~Introduction~~=		=介绍=
	==BPI-M1==		==BPI-M1==
	[[File:BPI-m1_respbian.png\|thumb\|Overview: BPI-M1 respbian linux]]		[[File:BPI-m1_respbian.png\|thumb\|Overview: BPI-M1 respbian linux]]
Line 6:		Line 6:
	[[File:BPI-m1_ubutnu.jpg\|thumb\|Overview: BPI-M1 ubuntu linux]]		[[File:BPI-m1_ubutnu.jpg\|thumb\|Overview: BPI-M1 ubuntu linux]]

	The Banana Pi M1 is our first product in our goal of creating an open source devlopment board community. With a Banana Pi, we want you to explore and experience the world of DIY projects and portable computing. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project		香蕉派M1是我们的第一个产品，我们的目标是创建一个开源开发板社区。使用香蕉派，我们希望你去探索和体验DIY项目和便携式计算的世界。我们欢迎社区里所有的公司、DIY爱好者和热爱科技的人！我们可以一起改变，我们可以发现我们的激情，激励他人，并建立一个切实可行的项目。

	*~~Read more about~~ : [[Banana Pi BPI-M1]]		*关于更多 : [[Banana Pi BPI-M1]]

	===~~Key Features~~===		===关键特性===
	* ~~Dual-core~~ 1.0GHz CPU		* 4核 1.0GHz CPU
	* 1 GB DDR3 ~~memeory~~		* 1 GB DDR3 内存
	* Mali-400 MP2 ~~with~~ Open GL ES 2.0/1.1		* Mali-400 MP2 和 Open GL ES 2.0/1.1

	=Development For Android=		=Development For Android=

JackZengWiki at 10:19, 11 October 2018

2018-10-11T10:19:06Z

← Older revision		Revision as of 10:19, 11 October 2018
Line 1:		Line 1:
	[[en:Getting_Started_with_M1]]		[[en:Getting_Started_with_M1]]
			=Introduction=
			==BPI-M1==
			[[File:BPI-m1_respbian.png\|thumb\|Overview: BPI-M1 respbian linux]]
			[[File:BPI-m1_debian.jpg\|thumb\|Overview: BPI-M1 debian linux]]
			[[File:BPI-m1_ubutnu.jpg\|thumb\|Overview: BPI-M1 ubuntu linux]]

			The Banana Pi M1 is our first product in our goal of creating an open source devlopment board community. With a Banana Pi, we want you to explore and experience the world of DIY projects and portable computing. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project

			*Read more about : [[Banana Pi BPI-M1]]

			===Key Features===
			* Dual-core 1.0GHz CPU
			* 1 GB DDR3 memeory
			* Mali-400 MP2 with Open GL ES 2.0/1.1

			=Development For Android=
			===Load your first image on M1===
			1.You could download latest image from our forum.
			Ex:

			2.Put your TF card into a TF-USB adapter, and then plug adapter in your Windows PC usb interface.

			3.Prepare your image, and download image burning tools PhoenixCard.exe.

			4.Use "PhoenixCard.exe" to burn android image to TF card.

			[[Image:M3_Android_Burning.png \| 600px]]

			* Download PhoenixCard: https://pan.baidu.com/s/18Fo_JhYY02gmxtFw2Ps3rQ

			===How to buld M1 Bsp code===
			* Prepare a PC which runs ubuntu
			* Install Docker-ce on your PC，https://docs.docker.com/install/linux/docker-ce/ubuntu/#install-docker-ce
			* After install Docker, execute "docker pull sinovoip/bpi-build-android:a20_01", to pull image
			* Then you pulled image, execute "docker run --privileged -d -p 2223:22 -v /media:/media sinovoip/bpi-build-android:a20_01"
			* "ssh -p 2223 root@127.0.0.1 #default passwd is root"
			* Execute "git clone https://github.com/BPI-SINOVOIP/BPI-M1-bsp.git" on your ubuntu terminal
			* Execute "./build.sh" to build M1 bsp code
			* After built, open a new terminal, execute "docker cp xxxxx(your container id):xxxxx(your project path) xxxxx(your pc path)"

			[[Image:docker_operate.png]]

			=Development For Linux=
			Let's get start to develop on BPI-M1, see amazing things happen.
			==Basic Development==
			===Prepare to develop===
			* Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
			* Using your USB-Serial Connect debug console on M1

			[[Image:M1_uart_pins.png \| 600px]]

			[[Image:M1_console_interface.png \| 600px]]

			===Load your first image on M1===
			1.You could download latest image from our forum
			* Here is the example link:

			2.Install bpi-tools on your system
			* apt-get install pv
			* curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools \| sudo -E bash

			3.After you download the image, insert your TF card into your Ubuntu
			* Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card.

			4.After step 3, then you can insert your TF card into M1, and press power button setup M1

			===Update your image===
			* execute “bpi-tools”, to update your bpi tools;
			* execute “bpi-update -c bpi-m1.conf”, to download new driver to update your image
			* execute “file *.tgz”, to check download files’ type is compressed data
			* execute “bpi-bootsel”, you will see the bootloader path, “/usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”
			* execute “bpi-bootsel /usr/lib/u-boot/bananapi/u-boot-2018.01/u-boot-2018.01-bpi-m1-8k.img.gz”, to update your bootloader
			* reboot

JackZengWiki: Created page with "en:Getting_Started_with_M1"

2018-10-11T09:28:26Z

Created page with "en:Getting_Started_with_M1"

New page

[[en:Getting_Started_with_M1]]