View source for Install Linux & Android images on Banana pi SBC

='''Introduction'''=
This page is main to describe how to install an image (Linux & Android) on Banana Pi SBC (TF card & Emmc)  under Linux or Windows OS.

='''Install Images Under Windows PC'''=
* If you install images on TF card under windows pc, please format your TF card firstly, but doesn't need to format TF card under Linux pc

=='''Fomat TF Card'''==
* Please see here to format your TF card：
* http://wiki.banana-pi.org/Quick_Start_Banana_pi_SBC#Format_your_SD_under_Windows_os

=='''Install Linux Images'''==
==='''Install Linux Images On TF Card'''===
* Before you doing this, please format your sd card firstly by following this link： 
* http://wiki.banana-pi.org/Quick_Start_Banana_pi_SBC#Format_your_SD_under_Windows_os

====Use Win32DiskImager====
* Download Win32DiskImager ：https://sourceforge.net/projects/win32diskimager/

[[File:Win32_Disk_1.png]]

[[File:Win32_Disk_2.png]]

[[File:Win32_Disk_3.png]]

====Use balenaEtcher====

* Download balenaEtcher ：https://www.balena.io/etcher/


[[File:balenaEtcher.jpg]]

[[File:balenaEtcher_Flash.jpg]]

[[File:balenaEtcher_Validate.jpg]]

[[File:balenaEtcher_Done.jpg]]

==='''Install Linux Images On Banana Pis' Emmc'''===
* Before install an linux image on board, please install an image on TF card firstly.

* After you installed image on TF card, then power on board by TF card

* Prepare image and store it in Udisk, plug Udisk into board.

[[File:Linux_Emmc_1.jpg]]

* Using "bpi-copy" or "dd" command to flash image on board Emmc.

[[File:Linux_Emmc_2.jpg]]

=='''Install Allwinner platform board Android Images'''==
==='''Install Android Images On TF Card'''===
* Before you doing this, please format your sd card firstly by following this link： 
* http://wiki.banana-pi.org/Quick_Start_Banana_pi_SBC#Format_your_SD_under_Windows_os

====Use PhoenixCard====
* You could install an image on SD card by following link：
* http://wiki.banana-pi.org/Quick_Start_Banana_pi_SBC#how_to_write_Android_image

==='''Install Android Images On Banana Pis' Emmc'''===
====Use PhoenixSuit====
* You could download PhoenixSuit from this link：https://androidmtk.com/download-phoenixsuit

* Connect board with PC by using usb-otg wire.

[[File:Android_Emmc_5.png]]

* If PhoenixSuit can't recognise device, please install usb driver for windows pc

* Please install usb driver by this link：https://androidmtk.com/category/drivers

* Open PhoenixSuit on windows, then press U-boot button on board when you connect PC with otg-usb wire. 

[[File:Android_Emmc_1.png]]

[[File:Android_Emmc_2.png]]

[[File:Android_Emmc_3.png]]

====Use PhoenixCard====
* Example：You could install an image on Emmc by following link：
* http://wiki.banana-pi.org/Getting_Started_with_M3#Load_your_image_on_M3_EMMC

='''Install Images Under Linux（Ubuntu） PC'''=
=='''Install Linux Images'''==
==='''Install Linux Images On TF Card'''===

=='''Install Android Images'''==