View source for 香蕉派 BPI-M3

[[en:Banana_Pi_BPI-M3]]

=介绍=
[[File:Banana_pi_BPI-M3_1.jpg|thumb|[[香蕉派 BPI-M3]] 采用全志科技  A83T 芯片设计]]
[[File:Banana_pi_BPI-M1_1.jpg|thumb|[[香蕉派 BPI-M1]] 采用全志科技 A20 芯片设计]]
[[File:Banana_pi_BPI-M1+_1.jpg|thumb|[[香蕉派 BPI-M1+]] 采用全志科技  A20 芯片设计]]
[[File:BPI-M2_zero_11.JPG|thumb|[[香蕉派 BPI-M2 ZERO]] 采用全志科技  H3 芯片设计]]
[[File:BPI-F2_zero_1.JPG|thumb|[[香蕉派 BPI-P2 Zero]] 采用全志科技 H3 芯片设计]]
[[File:Banana_pi_BPI-M2+_2.jpg|thumb|[[香蕉派 BPI-M2+]] 采用全志科技  H3 芯片设计]]
[[File:Banana_pi_bpi-m2_magic_5.JPG|thumb|[[香蕉派 BPI-M2M ]] 采用全志科技  R16 芯片设计]]
[[File:Banana_pi_BPI-M2_Berry_5.JPG|thumb|[[香蕉派 BPI-M2 Berry]] 采用全志科技  A40i 芯片设计]]
[[File:Banana_pi_BPI-M2_Ultra_4.JPG|thumb|[[香蕉派 BPI-M2U]] 采用全志科技  A40i 芯片设计]]
[[File:Banana_pi_BPI-M64_1.jpg|thumb|[[香蕉派 BPI-M64]] 采用全志科技  A64 芯片设计]]


[[File:Banana_pi_BPI-M3_5.jpg|thumb|Overview: front]]
[[File:3.7V.jpg|thumb|Overview: back]]
[[File:Banana_Pi_BPI-M2U_case_1.jpg|thumb|BPI-M3 Premium Aluminum Enclosure]]
[[File:Bpi-m2_ultar_case_1.jpg|thumb|BPI-M3 acrylic case]]
[[File:A83T.JPG|thumb|BPI 4.0 OEM&ODM server [[Successful case]] : A83T Raid Nas design]]

Banana PI BPI-M3 是一款8核高性能单板计算机，Banana PI BPI-M3是一款比树莓派更强悍的8核Android 5.1产品。

Banana PI BPI-M3 兼容性强大,可以跑android系统,Debian linux,Ubuntu linux, Raspberry Pi系统 和 cubieboard 系统.

Banana PI BPI-M3硬件：1Ghz ARM7 8核处理器，2GB LPDDR3内存，千兆以太网口，2 USB 接口 流畅运行Android5.1。Banana PI BPI-M3体积如信用卡大小，与BPI-M1+尺寸一样，但接口有不同，轻松运行《雷神之锤三：竞技场》这样的游戏，支持2K高清视频输出，GPIO兼容Raspberry PiB+并能运行其ROM Image。

BPI-M3在八核处理器上，采用了全志科技的A83T处理器。全志A83T采用台积电最新的28nm HPC工艺，基于8个ARMCortex-A7 CPU内核，最高频率可达2.0GHz，8核心可同时全速运行；在图像处理方面，A83T沿用A31/A31s的PowerVR SGX544 GPU,运行频率最高可达700MHz左右，图像处理性能十分强劲，确保了极致的游戏体验及UI流畅度。内存方面，DDR工作频率可达800MHz左右，能够流畅完美带动1920×1200高清分辨率屏幕。

[[File:BPI-M3_960x360.jpg]]

==关键特性==

* 全志A83T Octa-core 1.8GHz Powerful CPU.
* 2 GB LPDDR3 memory.
* 8 GB eMMC storage.
* HDMI out
* IR control
* WiFi & Bluetooth onboard.
* MIPI DSI ingerface
* CSI camera interface

==开始使用==
*镜像烧录及快速开始使用 : [[快速上手 香蕉派镜像烧录与系统启动]]
*如何在BPI-M3上进行开发 : [[快速上手 香蕉派 BPI-M3]]

=硬件=
==硬件接口示意图==
[[File:M3-hdw-label.jpg]]

==硬件规格==
{| class="wikitable"
|-
! 
! Banana Pi BPI-M3 硬件规格
|-
! CPU
| Allwinner A83T ARM Cortex-A7 Octa-Core 1.8&nbsp;GHz, 512KB L1 cache and 1MB L2 cache
|-
! GPU
| PowerVR SGX544MP1 Comply with OpenGL ES 2.0 OpenCL 1x, DX9_3
|-
! Memory
| 2 GB LPDDR3 (shared with GPU)
|-
! Storage
| On Board 8GB eMMC Flash, Micro SD-Card slot, SATA 2.0 Port (USB-to-SATA bridge)
|-
! Network
| 10/100/1000 Mbit/s Ethernet (Realtek RTL8211E/D) + Wi-Fi 802.11 b/g/n (AP6212) + Bluetooth BT4.0
|-
! Video Input(s)
| A CSI input connector allows for the connection of a designed camera module
|-
! Video Output(s)
| HDMI 1.4 (Type A Full), MIPI Display Serial Interface (DSI) for raw LCD Panel
|-
! Audio Input(s)
| On board microphone
|-
! Audio Output(s)
| 3.5mm jack and HDMI
|-
! USB ports
| USB 2.0 PORT (x2), USB OTG (x1)
|-
! Remote
| IR Receiver (x1)
|-
! GPIO
| 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM 
|-
! Switches
| Reset, Power and U-boot 
|-
! LED
| Power Status and 8P8C
|-
! Power Source
| 5 volt @2A via DC Power and/or Micro USB (OTG)
|-
! Size & Weight
| 92x60mm, 48g
|-
! OS
| Android and Linux
|}

==GPIO PIN 定义 ==

Banana Pi BPI-M3 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

[[File:Gpio define.png]]

{| class="wikitable"
|-
| style="background: PaleTurquoise; color: black" colspan="4"| '''40 PIN GPIO define of Banana pi BPI-M3'''
|-
|GPIO Pin Name||	Default Function||	Function2：GPIO||	Function3
|-
|CON1-P01||	VCC-3V3	|| ||
|-
|CON1-P02||	DCIN||  ||
|-
|CON1-P03||	TWI2-SDA||	PH5-EINT5||
|-
|CON1-P04||	DCIN|| ||　
|-
|CON1-P05||	TWI2-SCK||	PH4-EINT4||
|-
|CON1-P06||	GND|| ||
|-
|CON1-P07||	S-PWM||	PL10-S-EINT10||
|-
|CON1-P08||	UART2-TX||	PB0-EINT0||
|-
|CON1-P09||	GND|| ||
|-
|CON1-P10||	UART2-RX||	PB1-EINT1||
|-
|CON1-P11||	PC4	PC4|| ||
|-
|CON1-P12||	UART2-CTS||	PB3-EINT3||
|-
|CON1-P13||	PC7||	PC7	||
|-
|CON1-P14||	GND	|| ||
|-
|CON1-P15||	PC17||	PC17||
|-
|CON1-P16||	UART2-RTS||	PB2-EINT2||
|-
|CON1-P17||	VCC-3V3	||  ||
|-
|CON1-P18||	PL8-ENT8||	PL8-S-ENT8||
|-
|CON1-P19||	SPI0_MOSI||	PC0||
|-
|CON1-P20||	GND	|| ||
|-
|CON1-P21||	SPI0_MISO||	PC1	||
|-
|CON1-P22||	PL9-EINT9||	PL9-S-EINT9	||
|-
|CON1-P23||	SPI0_CLK||	PC2	||
|-
|CON1-P24||	SPI0_CS||	PC3||
|-
|CON1-P25||	GND|| ||
|-
|CON1-P26||	PH10-ENT10||	PH10-ENT10||
|-
|CON1-P27||	TWI1-SDA||	PH3-EINT3||
|-
|CON1-P28||	TWI1-SCK||	PH2-EINT2||
|-
|CON1-P29||	PC18||	PC18||
|-
|CON1-P30||	GND|| ||
|-
|CON1-P31||	I2S1-BCLK||	PG10-EINT10||	UART3-TX
|-
|CON1-P32||	I2S1-DIN||	PG13-EINT13||	UART3-CTS
|-
|CON1-P33||	I2S1-LRCK||	PG11-EINT11||	UART3-RX
|-
|CON1-P34||	GND	|| ||
|-
|CON1-P35||	I2S1-DOUT||	PG12-EINT12||	UART3-RTS
|-
|CON1-P36||	PE5||	PE5	||
|-
|CON1-P37||	PE4||	PE4	||
|-
|CON1-P38||	OWA-DOUT||	PE18||
|-
|CON1-P39||	GND	|| ||
|-
|CON1-P40||	PE19||	PE19||
|- 
|}

'''CSI Camera Connector specification:'''


The CSI Camera Connector is a 40-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin definitions of the CSI interface are shown as below. This is marked on the Banana Pi board as “CSI”.

{| class="wikitable"
|-
| style="background: PaleTurquoise; color: black" colspan="4"| '''CSI camera GPIO of Banana pi BPI-M3'''
|-
|CSI Pin Name||	Default Function||	Function2：GPIO
|-
|CN7-P01||	IPSOUT	||
|-
|CN7-P02||	AFVCC	||
|-
|CN7-P03||	IPSOUT	||
|-
|CN7-P04||	IOVDD	||
|-
|CN7-P05||	GND||
|-
|CN7-P06||	GND	||
|-
|CN7-P07||	CSI2-D3N||
|-
|CN7-P08||	AVDD-CSI||
|-
|CN7-P09||	CSI2-D3P||
|-
|CN7-P10||	DVDD-CSI-R||
|-
|CN7-P11||	GND	||
|-
|CN7-P12||	NC	||
|-
|CN7-P13||	CSI2-D2N||
|-
|CN7-P14||	CSI-RST-R||	PE16
|-
|CN7-P15||	CSI2-D2P||	|
|-
|CN7-P16||	CSI-STBY-R||	PE17
|-
|CN7-P17||	GND||
|-
|CN7-P18||	CSI-PCLK||	PE0
|-
|CN7-P19||	CSI2-CKN||
|-
|CN7-P20||	CSI-MCLK||	PE1
|-
|CN7-P21||	CSI2-CKP||
|-
|CN7-P22||	CSI-HSYNC||	PE2
|-
|CN7-P23||	GND||
|-
|CN7-P24||	CSI-VSYNC||	PE3
|-
|CN7-P25||	CSI2-D1N||
|-
|CN7-P26||	CSI-D9||	PE13
|-
|CN7-P27||	CSI2-D1P||
|-
|CN7-P28||	CSI-D8||	PE12
|-
|CN7-P29||	GND	||
|-
|CN7-P30||	CSI-D7||	PE11
|-
|CN7-P31||	CSI2-D0N||
|-
|CN7-P32||	CSI-D6||	PE10
|-
|CN7-P33||	CSI2-D0P||
|-
|CN7-P34||	CSI-D5||	PE9
|-
|CN7-P35||	GND||
|-
|CN7-P36||	CSI-D4||	PE8
|-
|CN7-P37||	CSI-SCK||	PE14
|-
|CN7-P38||	CSI-D3||	PE7
|-
|CN7-P39||	CSI-SDA||	PE15
|-
|CN7-P40||	CSI-D2||	PE6
|- 
|}

'''Display specification'''

MIPI DSI (Display Serial Interface)：

The display Connector is a 40-pin FPC connector which can connect external LCD panel (MIPI DSI) and touch screen (I2C) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as “DSI”.

{| class="wikitable"
|-
| style="background: PaleTurquoise; color: black" colspan="4"| '''MIPI DSI PIN define of Banana pi BPI-M3'''
|-
|DSI Pin Name||	Default Function||	Function2：GPIO
|-
|CN6-P01||	VCC-MIPI||
|-
|CN6-P02||	IPSOUT||
|-
|CN6-P03||	VCC-MIPI||
|-
|CN6-P04||	IPSOUT||
|-
|CN6-P05||	GND	||
|-
|CN6-P06||	IPSOUT||
|-
|CN6-P07||	GND	||
|-
|CN6-P08||	IPSOUT||
|-
|CN6-P09||	NC||
|-
|CN6-P10||	GND	||
|-
|CN6-P11||	NC	||
|-
|CN6-P12||	DSI-D0N	||
|-
|CN6-P13||	NC||
|-
|CN6-P14||	DSI-D0P	||
|-
|CN6-P15||	NC	||
|-
|CN6-P16||	GND	||
|-
|CN6-P17||	TWI0-SDA||	PH1-EINT1
|-
|CN6-P18||	DSI-D1N||
|-
|CN6-P19||	TWI0-SCK||	PH0-EINT0
|-
|CN6-P20||	DSI-D1P	||
|-
|CN6-P21||	TP-INT||	PL7-S-EINT7
|-
|CN6-P22||	GND||
|-
|CN6-P23||	TP-RST||	PL6-S-EINT6
|-
|CN6-P24||	DSI-CKN	||
|-
|CN6-P25||	GND	||
|-
|CN6-P26||	DSI-CKP||
|-
|CN6-P27||	LCD-BL-EN||	PD29
|-
|CN6-P28||	GND	||
|-
|CN6-P29||	LCD-RST||	PD26
|-
|CN6-P30||	DSI-D2N	||
|-
|CN6-P31||	LCD-PWR-EN||	PD27
|-
|CN6-P32||	DSI-D2P||
|-
|CN6-P33||	GND	||
|-
|CN6-P34||	GND	||
|-
|CN6-P35||	LCD-PWM||	PD28
|-
|CN6-P36||	DSI-D3N	||
|-
|CN6-P37||	GND	||
|-
|CN6-P38||	DSI-D3P||
|-
|CN6-P39||	AP-RESET#||
|-
|CN6-P40||	GND	|||
|- 
|}

'''UART specification:'''

The header CON4 is the UART interface.For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.

{| class="wikitable"
|-
| style="background: PaleTurquoise; color: black" colspan="4"| '''Uart debug pin of Banana pi BPI-M3'''
|-
|CON2 Pin Name	||Default Function||	GPIO
|-
|CON2 P03||	UART0-TXD||	PB9
|-
|CON2 P02||	UART0-RXD||	PB10
|-
|CON2 P01||	GND||
|- 
|}

=软件=
==Android==
*如何在windows系统下烧录镜像到eMMC ： https://bananapi.gitbooks.io/bpi-m3/content/en/how_to_burn_android_image_to_emmc.html
*BPI-M3 在android系统下如何控制GPIO ：https://bananapi.gitbooks.io/bpi-m3/content/en/howtocontrolgpioonandroid.html

==Linux==
*How to burn Linux image to eMMC : https://bananapi.gitbooks.io/bpi-m3/content/en/howtoburnlinuximagetoemmc.html
*GPU for kernel 3.4 : https://bananapi.gitbooks.io/bpi-m3/content/en/gpuforkernel34.html
*How to rotate display screen : https://bananapi.gitbooks.io/bpi-m3/content/en/howtorotatedisplayscreen.html
*how to use fatload uEnv.txt & script.bin & kernel uImage : https://bananapi.gitbooks.io/bpi-m3/content/en/howtousefatloaduenvtxtscriptbinkernel_ui.html

==Opnewrt==
==TinaLinux==

=软件开发=

==基本开发==
*[https://bananapi.gitbooks.io/bpi-m3/content/en/howtosetupdockerenvtobuildgithubsourcecod.html How to setup docker env. to build github source code ]
*[https://bananapi.gitbooks.io/bpi-m3/content/en/howtocompilebpi-m3-bspkernelonbpi-m3.html How to compile BPI-M3-bsp kernel on BPI-M3]
*[https://bananapi.gitbooks.io/bpi-m3/content/en/bpi-m3crosscompileteach.html  BPI-M3 BSP Cross Compile teach]
*[https://bananapi.gitbooks.io/bpi-m3/content/en/bpi-m3fixrootmydeviceissueforsecurityalert.html BPI-M3 fix rootmydevice issue for Security Alert]

=资源=
==软件源代码==
* BPI-M3 android 5.1 source code ： https://drive.google.com/open?id=0B\_YnvHgh2rwjaGhIeUE0eERTZU0
*BPI-M3 Linux BSP code : https://github.com/BPI-SINOVOIP/BPI-M3-bsp

==参考文档==
*BPI-M3 原理图下载: https://drive.google.com/folderview?id=0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM&usp=sharing&tid=0B4PAo2nW2Kfndjh6SW9MS2xKSWs
*BPI-M3 DXF 结构文件下载: https://drive.google.com/file/d/0B4PAo2nW2KfnNm54VjBlUXhXekU/view
*BPI-M3 3D设计文档下载 : https://drive.google.com/file/d/0B4PAo2nW2KfnYXVGWXBURDFSeTA/view
*A83T 芯片规格书 V1.4 : https://drive.google.com/file/d/0B4PAo2nW2KfnM2VqeTR3SXpGdVE/view?usp=sharing 
*全志 A83T 芯片用户使用手册V1.5.1 : https://drive.google.com/file/d/0B4PAo2nW2KfnRjlQaU9uR0J0elE/view?usp=sharing
*android 5.0 开发文档（中文版本）：https://drive.google.com/file/d/0B4PAo2nW2KfnekpvMnlNZ2p6NWs/view?usp=sharing
*全志芯片在线规格书与开发文档下载: http://dl.linux-sunxi.org/
*linux-sunxi wiki在线文档 : http://linux-sunxi.org/Banana_Pi_M3
*BPI-M3 硬件质量测试与认证证书：
::BPI-M3 WIFI Lab test report : https://bananapi.gitbooks.io/bpi-m3/content/en/bpi-m3wifilabtest.html
::BPI-M3 Validation test report : https://bananapi.gitbooks.io/bpi-m3/content/en/bpi-m3validationtest.html
::BPI-M3 CE,FCC RoHS Certification : http://forum.banana-pi.org/t/bpi-m3-ce-fcc-rohs-certification/984

=系统镜像=
==Android 5.1.1 V5==
*2018-06-05 update 
*HDMI-Version
::Google Drive : https://drive.google.com/open?id=1mLXOAH_LPT-uqtwWvgvJXw4Vo95tFr_z
::Baidu Cloud : https://pan.baidu.com/s/1byqwqzz9SOIWHYfOabXKNw

*LCD-Version
::Google Drive : https://drive.google.com/open?id=1DAxQIws0eAVPAm0riH5HXc8M36SH_-sC
::Baidu Cloud : https://pan.baidu.com/s/19l7a6Z75FuZb_f9Ls0fN5w

*2017-05-11 update 
*HDMI-Version
::Google Drive : https://drive.google.com/open?id=0B_YnvHgh2rwjcXkxczlmOWxWV00
::Baidu Cloud : https://pan.baidu.com/s/1pKF3Ggj
::MD5: d7b7abf3443a49fb0f178ccf2f6e82d0 
*LCD-Version
::Google Drive : https://drive.google.com/open?id=0B_YnvHgh2rwjSkM5NHFWYVdlakk
::Baidu Cloud : https://pan.baidu.com/s/1mi2YOeG 
::MD5: b27dd45ac5fd1fd3b02db8ffd92c2871 
*forum pthread : http://forum.banana-pi.org/t/bpi-m3-new-image-android-5-1-version-v5-2017-05-11/3241

==Ubuntu==

*2018-07-18 BPI-M3 Ubuntu 16.04 Mate Desktop (new eMMC)
::Features Map ：http://wiki.banana-pi.org/M3_Image_Map#Ubuntu_16.04
::Google Drive : https://drive.google.com/open?id=1DlOrt08yUY9hAETiUXBiyoyPFHrOxtvq
::Baidu Drive : https://pan.baidu.com/s/1ND5QqoBevzM2TykwqZCkAA
::forum pthread: http://forum.banana-pi.org/t/bananapi-bpi-m3-new-image-new-emmc-ubuntu16-04-debian9-release-2018-07-18/6294

*2018-07-18 M3 Ubuntu Server (new eMMC)
::Features Map : http://wiki.banana-pi.org/M3_Image_Map#Ubuntu_Lite
::Google Drive : https://drive.google.com/open?id=1Yyd2BepHjyhgXhSmnFh_0Az6YoXPEI3J
::Baidu Drive : https://pan.baidu.com/s/10vSo0AmIiMrVLNPkQ63leQ
::forum pthread: http://forum.banana-pi.org/t/bananapi-bpi-m3-new-image-new-emmc-ubuntu16-04-debian9-release-2018-07-18/6294

*2018-05-31 update ubuntu 16.04 mate desktop
**HDMI verison baidu cloud :　https://pan.baidu.com/s/1UDktbDgGtXpbqIZn_TI1Tg

*2017-07-13 update ubuntu 16.04 mate desktop
* Image Link: 
**HDMI version Google Drive:https://drive.google.com/file/d/0B_YnvHgh2rwjRThoaHliWVVyZGM/view?usp=sharing 
**HDMI verison baidu cloud :　http://pan.baidu.com/s/1nu6hJs9
**Forum pthread: http://forum.banana-pi.org/t/banana-pi-bpi-m3-new-image-ubuntu-16-04-mate-desktop-beta-bpi-m3-ov8865-sd-emmc-2017-07-13/3542
**LCD 7 verison Google Drive:https://drive.google.com/file/d/0B_YnvHgh2rwjVldzUENFQXpiTHc/view?usp=sharing
**LCD 7 version baidu cloud :　http://pan.baidu.com/s/1o8Uc4Y2 
**Forum pthread : http://forum.banana-pi.org/t/banana-pi-bpi-m3-new-image-ubuntu-16-04-mate-desktop-beta-bpi-m3-lcd7-ov8865-sd-emmc-img-2017-7-13/3543
**LCD 5 Version Google Drive:https://drive.google.com/file/d/0B_YnvHgh2rwjUlpIVjB6LVVmMGc/view?usp=sharing 
**LCD 5 Version baidu cloud : http://pan.baidu.com/s/1hsIJygG 
** Forum thread:http://forum.banana-pi.org/t/banana-pi-bpi-m3-new-image-ubuntu-16-04-mate-desktop-beta-bpi-m3-lcd5-ov8865-sd-emmc-img-2017-7-13/3544

==Debian==
*2018-07-18 BPI-M3 Debian Jessie 9 (new eMMC)
::Features Map : http://wiki.banana-pi.org/M3_Image_Map#Debian_Jessie_9
::Google Drive : https://drive.google.com/open?id=1M997Uf-RVqdFKJkXMjgY0w3fHyiOq4iG
::Baidu Drive : https://pan.baidu.com/s/1yQYG1iOEIrJADV_j-qvdwQ
::Forum pthread : http://forum.banana-pi.org/t/bananapi-bpi-m3-new-image-new-emmc-ubuntu16-04-debian9-release-2018-07-18/6294

==Armbian==
*Armbian with 4.17.y for M3
::Test build:http://ix.io/1fUK
::Broken: wired, wireless network, Bluetooth, ...
::Works: serial console, 8 cores, DVFS, USB, SATA, HDMI, DRM video driver, ...
::image:https://forum.armbian.com/topic/474-banana-pi-m3/?do=findComment&comment=57400
::Forum pthread:http://forum.banana-pi.org/t/armbian-with-4-17-y-for-m3/6174

==Rasbian==
* 2018-5-28 update : Raspbian 8.0 V1.1 
::Image Link: 
::::Google Drive:  https://drive.google.com/open?id=1DSZru8UQRikI6pImLZIt1DmySVozy0FA
::::baidu cloud : https://pan.baidu.com/s/1Pz_6btHxj6F9w_6aw90Dww
::Forum thread:
:::: http://forum.banana-pi.org/t/banana-pi-bpi-m3-new-image-release-raspbian-jessie-8-0-2018-5-28-v1-1/5847

==Arch Linux ==
*2018-08-19 ArchLinux-4.18.1-1-ARCH : Kernel: 4.18.1-1-ARCH U-Boot: 2018.09-rc1
::U-Boot: 2018.09-rc1,Kernel: 4.18.1-1-ARCH,Ethernet works,Wifi works,HDMI works,LCD needs to be checked(I would appreciate if someone can check it),GPIO works(WiringPi),BPI tools included,I2C enabled(In TDB file)
::source code on github : https://github.com/apankevych/BananaPi-M3-Linux-4.18.1-1-ARCH
::download Image link:https://drive.google.com/file/d/1ia3JSmHH8ksia4e8doalUGSBHnytOgx4/view?usp=sharing
::Forum pthread : http://forum.banana-pi.org/t/bananapi-bpi-m3-new-image-archlinux-4-18-1-1-arch-2018-08-19/6544

*2018-07-19 Arch Linux sunxi kernel-4.18-rc3 and uboot- 2018.01 thank Andriy_Pankevych do this great work.
:: Google drive : https://drive.google.com/open?id=1Ve91MG_7d1haawqqmiBo4qCugvF1iLyn
:: Source code: https://github.com/apankevych/BananaPi-M3-Linux-4.18.0-rc3
:: Forum pthread : http://forum.banana-pi.org/t/banana-pi-bpi-m3-new-image-arch-linux-sunxi-kernel-4-18-rc3-and-uboot-2018-01-2018-07-19/6312

==FreeBSD==

FreeBSD on Allwinner (sunxi) systems for banana pi

Banana pi as the official partner of Allwinner , must banana pi product use Allwinner chip design . such as A20/A31S/H3/H2+/A64/A83T , and FreeBSD have support many Allwinner . so easy to use on banana pi board.
*Allwinner A20 (sun7i), a dual-core Cortex-A7 BPI-M1/BPI-M1+/BPI-R1
*Allwinner A31 and A31s (sun6i), a quad-core Cortex-A7 BPI-M2
*Allwinner A64 (sun50i), a quad-core Cortex-A53 BPI-M64 
*Allwinner A83T (sun8i), an octa-core Cortex-A7 BPI-M3 
*Allwinner H3 (sun8i), a quad-core Cortex-A7 BPI-M2+/BPI-M2+ EDU/
https://wiki.freebsd.org/FreeBSD/arm/Allwinner

==Simplenas==
*simplenas image : https://simplenas.com/download/other/banana-m3

==Lakka TV==
*Banana Pi M2+ with H3 chip 
*Banana Pi M3 with A83T chip
*BPI-M1 and BPI-M1+ use A20 chip 
*more about this : https://bananapi.gitbooks.io/bpi-m3/content/en/lakkatv.html

http://mirror.lakka.tv/nightly/



==Others image==
*http://forum.banana-pi.org/c/bpi-m3/M2image

=FAQ=