View source for 快速上手 R1

[[en:Getting_Started_with_R1]]

=Introduction=
==BPI-R1==
[[File:R1_bananian.png|thumb|Overview: BPI-R1 bananian linux]]

   The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
   The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

*Read more about : [[Banana Pi BPI-R1]]

===Key Features===
* Dual-core 1.0GHz CPU
* 1 GB DDR3 memory
* Mali-400 MP2 with Open GL ES 2.0/1.1
* 4x Gigabit LAN 1x Gigabit WAN

=Development=
==Basic Development==
===Prepare to develop===
  * Prepare 16G/above TF card, USB-Serial interface, Ubuntu System
  * Using your USB-Serial Connect debug console on R1

  [[Image:R1_debug_console.png|240px]]

  [[Image:R1_DC_IN.png|240px]]

===Load your first image on R1===
  1.You could download latest image from our forum
  
  2.Install bpi-tools on your Ubuntu
  * apt-get install pv
  * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
  
  3.After you download the image, insert your TF card into your Ubuntu
  * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card
  
  4.After step 3, then you can insert your TF card into R1, and press power button setup R1