Getting Started with W2
- 1 Introduction
- 2 Development
Read more: Banana Pi BPI-W2
Let's get start to develop on BPI-W2, see amazing things happen.
Old page：Getting Started with BPI-W2
Prepare to develop
- Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
- Using your USB-Serial Connect debug console on W2
Load your first image on W2
1.You could download latest image from our forum 2.Install bpi-tools on your system * apt-get install pv * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash 3.After you download the image, insert your TF card into your Ubuntu * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card. 4.After step 3, then you can insert your TF card into W2, and press power button setup W2.
- iperf3 -c [server]
- iperf3 -u -c [server]
- iperf3 -s