Difference between revisions of "Getting Started with R1"

From Banana Pi Wiki
Jump to: navigation, search
(BPI-R1)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
[[zh:快速上手 香蕉派 BPI-R1]]
 
=Introduction=
 
=Introduction=
 
==BPI-R1==
 
==BPI-R1==
 
[[File:R1_bananian.png|thumb|Overview: BPI-R1 bananian linux]]
 
[[File:R1_bananian.png|thumb|Overview: BPI-R1 bananian linux]]
 +
[[File:Banana_pi_BPI-R1_1.JPG|thumb|[[Banana Pi BPI-R1]] Allwinner A20]]
 +
[[File:BPI-R2_3.JPG|thumb|[[Banana Pi BPI-R2]] with MTK MT7623N chip design]]
 +
[[File:Banana_Pi_BPI-R2_Pro_1_750.jpg|thumb|[[Banana Pi BPI-R2 Pro]] Rockchip RK3568 design]]
 +
[[File:BPI-R64_3.JPG|thumb|[[Banana Pi BPI-R64]] MTK MT7622]]
 +
[[File:O2A0500.jpg|thumb|[[Banana Pi BPI-W2]] with Realtek RTD1296 chip design]]
 +
[[File:Banana_Pi_BPI-R3_Router_2.jpg|thumb|[[Banana Pi BPI-R3]] with MediaTek MT7986(Filogic 830)]]
 +
[[File:Banana_Pi_BPI-M2S_1.jpg|thumb|[[Banana Pi BPI-M2S]] Amlogic A311D chip]]
  
 
   The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
 
   The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
Line 22: Line 30:
 
   [[Image:R1_debug_console.png|240px]]
 
   [[Image:R1_debug_console.png|240px]]
  
 +
  [[Image:R1_DC_IN.png|240px]]
  
 
===Load your first image on R1===
 
===Load your first image on R1===
 
   1.You could download latest image from our forum
 
   1.You could download latest image from our forum
 
    
 
    
   2.Install bpi-tools on your Ubuntu
+
   2.Install bpi-tools on your Ubuntu. If you can't access this URL or any other problems, please go to [https://github.com/BPI-SINOVOIP/bpi-tools bpi-tools repo] and install this tools manually.
 
   * apt-get install pv
 
   * apt-get install pv
 
   * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
   * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
Line 33: Line 42:
 
   * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card
 
   * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card
 
    
 
    
   4.After step 3, then you can insert your TF card into R1, and press power button for around 10s to setup R1
+
   4.After step 3, then you can insert your TF card into R1, and press power button setup R1

Latest revision as of 01:22, 29 June 2022

Introduction

BPI-R1

Overview: BPI-R1 bananian linux
Banana Pi BPI-R1 Allwinner A20
Banana Pi BPI-R2 with MTK MT7623N chip design
Banana Pi BPI-R2 Pro Rockchip RK3568 design
Banana Pi BPI-W2 with Realtek RTD1296 chip design
Banana Pi BPI-R3 with MediaTek MT7986(Filogic 830)
Banana Pi BPI-M2S Amlogic A311D chip
  The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
  The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Key Features

  • Dual-core 1.0GHz CPU
  • 1 GB DDR3 memory
  • Mali-400 MP2 with Open GL ES 2.0/1.1
  • 4x Gigabit LAN 1x Gigabit WAN

Development

Basic Development

Prepare to develop

 * Prepare 16G/above TF card, USB-Serial interface, Ubuntu System
 * Using your USB-Serial Connect debug console on R1
 R1 debug console.png
 R1 DC IN.png

Load your first image on R1

 1.You could download latest image from our forum
 
 2.Install bpi-tools on your Ubuntu. If you can't access this URL or any other problems, please go to bpi-tools repo and install this tools manually.
 * apt-get install pv
 * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
 3.After you download the image, insert your TF card into your Ubuntu
 * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card
 
 4.After step 3, then you can insert your TF card into R1, and press power button setup R1