Difference between revisions of "Getting Started with P2-Zero"

From Banana Pi Wiki
Jump to: navigation, search
(Basic Development)
Line 31: Line 31:
 
   [[Image:P2_Zero_debug_console.jpg]]
 
   [[Image:P2_Zero_debug_console.jpg]]
  
===Load your first image on P2 Zero===
+
===Install Linux Image on P2 Zero===
  1.You could download latest image from our forum
+
Download [http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Linux latest Linux image]
  * Here is the example: http://forum.banana-pi.org/t/bananapi-bpi-p2-zero-h2-with-poe-ubuntu-image-release-2018-08-17/6533
+
 +
Install Image to SDcard on Linux PC with bpi-tools
 +
:1. Install bpi-tools on your system
 +
    $ apt-get install pv
 +
    $ curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
    
 
    
  2.Install bpi-tools on your system
+
:2. Insert your SDcard into your PC
  * apt-get install pv
+
    $ bpi-copy xxx.img /dev/sdx
  * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
 
    
 
    
  3.After you download the image, insert your TF card into your Ubuntu
+
Install Image to SDcard with Ether on Windows, Linux and MacOS
  * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card.
+
:[https://www.balena.io/etcher/ Balena Etcher] is an open source project by Balena, Flash OS images to SD cards & USB drives
 
+
 
  4.After step 3, then you can insert your TF card into P2 Zero, and press power button setup P2 Zero
+
Install Image to EMMC with SD Ubuntu
 +
:1.Prepare a sd which is installed ubuntu image and bootup with sdcard
 +
:2.Copy emmc image to udisk, plug in board, then mount udisk.
 +
:3.After mount udisk, use command "bpi-copy xxx-emmc-xxx.img" to install image on Emmc.
 +
:4.After success install, power off the board, eject the sdcard and poweron with emmc boot.
  
 
===Update your image===
 
===Update your image===
  1.Clone M2Z repo: https://github.com/BPI-SINOVOIP/BPI-M2Z-bsp , M2 zero and P2 zero are using same bsp code.
+
:1. Get the p2 zero bsp source code
  * git clone https://github.com/BPI-SINOVOIP/BPI-M2Z-bsp
+
    $ git clone https://github.com/BPI-SINOVOIP/BPI-M2P-bsp-4.4
  
  2.Build your project
+
:2. Build the source code according to the README.md, and update the packages to the sdcard with bpi image flashed.
  * ./build.sh BPI-M2Z-720P
 
    [[Image:P2_Zero_build.jpg]]
 
 
 
  3.After finish built, Execute "cd SD", plug your Ubuntu TFcard in PC, then check your TFcard was recognised as /dev/sdX by Ubuntu.
 
 
  4. Execute "bpi-update -c bpi-m2z.conf -d /dev/sdX", to update the compiled kernel to your TFcard
 
  
 
==Advanced Development==
 
==Advanced Development==

Revision as of 03:55, 16 June 2020

Introduction

Overview: BPI-M2Z raspbian

BPI-P2 Zero

Banana Pi BPI-P2 Zero is an ultra compact single board computer measures only 65mm*52.5mm. It uses quad-core Cortex A7 allwinner H2+ processor(Option : H3 and H5), with 512MB RAM memory.8G eMMC flash,100M LAN,add PoE function support , It's ideal for light-weight systems with some space-limited applications. Like other members of Banana Pi, it supports both linux and android operating system.

Key Features

  • CPU: Allwinner H2+, Quad-core Cortex-A7
  • 512MB DDR 3 SDRAM
  • WiFi (AP6212) & Bluetooth onboard
  • Mini HDMI
  • 40 PIN GPIO, It includes UART, SPI, I2C, IO etc
  • 100M LAN
  • IEEE 802.3af PoE standard PoE module support
  • 8G eMMC flash onboard

Development

Basic Development

Prepare to develop

 * Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
 * Using your USB-Serial Connect debug console on P2 Zero
 
 Debug console wire.png
 P2 Zero debug console.jpg

Install Linux Image on P2 Zero

Download latest Linux image

Install Image to SDcard on Linux PC with bpi-tools

1. Install bpi-tools on your system
   $ apt-get install pv
   $ curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
2. Insert your SDcard into your PC
   $ bpi-copy xxx.img /dev/sdx
 

Install Image to SDcard with Ether on Windows, Linux and MacOS

Balena Etcher is an open source project by Balena, Flash OS images to SD cards & USB drives

Install Image to EMMC with SD Ubuntu

1.Prepare a sd which is installed ubuntu image and bootup with sdcard
2.Copy emmc image to udisk, plug in board, then mount udisk.
3.After mount udisk, use command "bpi-copy xxx-emmc-xxx.img" to install image on Emmc.
4.After success install, power off the board, eject the sdcard and poweron with emmc boot.

Update your image

1. Get the p2 zero bsp source code
   $ git clone https://github.com/BPI-SINOVOIP/BPI-M2P-bsp-4.4
2. Build the source code according to the README.md, and update the packages to the sdcard with bpi image flashed.

Advanced Development

How to create an image

  • Prepare a SD card which have installed system(Ubuntu/Raspbian/..)
  • Boot your SD card with M2 Zero, after M2 Zero finish starting, copy your files and config your system, then poweroff M2 Zero. [If you don't want to config your system, you can skip this step]
  • Plug your SD card in PC(which is running Linux), "cd /media", then "ln -s <your account> pi"
  • Execute "bpi-migrate -c bpi-m2z.conf -c ubuntu-mate-from-sd.conf -d /dev/sdx"
  • Then you could get your own image now

OTG

1. On M2 Zero console:

  • Execute "./adbd.sh", then execute "ps -ax | grep adbd" to see if adbd is set up

2. On PC terminal:

  • If adbd was succeed to set up, insert OTG-USB interface to M2 Zero and PC(with Ubuntu system)
  • Execute "adb devices" to see if PC has recognised M2 ZeroP OTG
  • If yes, we could execute "adb shell" to connect M2 Zero by adb now

EMac

  • Use iperf3 to test network

P2Zero network.jpg

Bluetooth

  • Use bluetoothctl tool to operate BT
  • Execute "bluetoothctl"
  • If you don't know how to use bluetoothctl, type "help", you will see more commands
  • Execute these commands:

M2Zero bluetooth.png

WiFi Client

You have two ways to setup WiFi Client

1. Use commands to setup WiFi client

  • ip link set wlan0 up
  • iw dev wlan0 scan | grep SSID
  • vim /etc/wpasupplicant/wpa_supplicant.conf
 network={    
 ssid="ssid"    
 psk="password"    
 priority=1 
 }
  • wpa_supplicant -iwlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
  • dhclient wlan0

2. Use UI interface to setup WiFi Client

Clear boot

Camara function

We use HDF5640 camara.

Ov5640 camara.png

Guvcview

  • Use your UI interface to operate camara
  • Applications -> Sound & Video -> guvcview

Shell

  • We also have built-in command in /usr/local/bin to test camara
  • "./test_ov5640_image_mode.sh" to test picture taking function
  • "./cameratest.sh" to test video recording function

Display

How to change display resolution

For Example: we change M2Z HDMI display 1080P.

1. First, mount /dev/mmcblk0p1 /mnt, then enter to /mnt/bananapi/bpi-m2z/linux, find "sys_config.fex";

2. "vim sys_config.fex", change "screen0_output_mode = 5" to "screen0_output_mode = 10"

Display output.png

3. After save changed, use "fex2bin" command to transfer sys_config.fex to bin file, "fex2bin sys_config.fex script.bin ", reboot.

parameters meaning:

Display mode.png

BPI-Tools

Install Bpi-tools

Update Bpi-tools

  • Execute "bpi-tools"

Bpi-tools.png

RPi.GPIO

Install RPi.GPIO

  • Execute "git clone https://github.com/BPI-SINOVOIP/RPi.GPIO"
  • after clone the repo, cd RPi,GPIO
  • Execute "sudo apt-get update"
  • Execute "sudo apt-get install python-dev python3-dev"
  • Execute "sudo python setup.py install" or "sudo python3 setup.py install" to install the module

Using RPi.GPIO

  • cd /usr/local/bin
  • Execute "./bpi_test_g40.py" to test RPi.GPIO

RPi GPIO.png

WiringPi

How to Update WiringPi

  • Execute "bpi-update -c pkglist.conf"

Update Pkglist.png

  • Execute "bpi-update -c bpi-pkg-bpi-wiringpi.conf"

Update WringPi.png

RGB 1602 LCD

  • Execute "/usr/local/bin/bpi_test_lcd1602.sh"

0.96 Inch OLED Display

  • Execute "/usr/local/bin/bpi_test_52pi.sh"

8x8 RGB LED Martix

  • Firstly you need a GPIO Extend Board for 8x8 LED Martix

WringPi LED Martix Extend Board.png

  • Execute "/usr/local/bin/bpi_test_gpio40.sh"