Getting Started with M2M

From Banana Pi Wiki
Revision as of 20:19, 24 August 2018 by JackZengWiki (talk | contribs) (0.96 Inch OLED Display)
Jump to: navigation, search

Introduction

BPI-M2M

Overview: BPI-M2M ubuntu linux
  Banana Pi M2M is another ARM SoC powered development board that offers great computing performance in an ultra portable form factor. It is a 51mm square with Allwinner A33 Quad-core A7 SoC and 512MB DDR3 RAM. 

Key Features

  • Quad Core ARM Cortex A7 CPU. R16
  • 512MB DDR3 SDRAM
  • WiFi (AP6212) & Bluetooth onboard

Development

Basic Development

Prepare to develop

 * Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
 * Using your USB-Serial Connect debug console on M2M
 
 M2M debug console.png  M2M pin define.png


BPI-Tools

Install Bpi-tools

Update Bpi-tools

  • Execute "bpi-tools"

Bpi-tools.png

RPi.GPIO

Install RPi.GPIO

  • Execute "git clone https://github.com/BPI-SINOVOIP/RPi.GPIO"
  • after clone the repo, cd RPi.GPIO
  • Execute "sudo apt-get update"
  • Execute "sudo apt-get install python-dev python3-dev"
  • Execute "sudo python setup.py install" or "sudo python3 setup.py install" to install the module

Using RPi.GPIO

  • cd /usr/local/bin
  • Execute "./bpi_test_g40.py" to test RPi.GPIO

RPi GPIO.png

WiringPi

How to Update WiringPi

  • Execute "bpi-update -c pkglist.conf"

Update Pkglist.png

  • Execute "bpi-update -c bpi-pkg-bpi-wiringpi.conf"

Update WringPi.png

RGB 1602 LCD

  • Execute "/usr/local/bin/bpi_test_lcd1602.sh"

WringPi 1602 LCD.png

0.96 Inch OLED Display

  • Execute "/usr/local/bin/bpi_test_52pi.sh"

8x8 RGB LED Martix

  • Firstly you need a GPIO Extend Board for 8x8 LED Martix

WringPi LED Martix Extend Board.png

  • Execute "/usr/local/bin/bpi_test_gpio40.sh"

WringPi LED Martix m2m.png