Difference between revisions of "Getting Started with BPI-M5"

From Banana Pi Wiki
Jump to: navigation, search
(Install Image with Usb Burning Tool)
(Install Image with Usb Burning Tool)
Line 42: Line 42:
  
 
:[[File:m5_android_install_1.png]]
 
:[[File:m5_android_install_1.png]]
 +
  
 
:2. M5 board disconnect power, press and hold SW4 button beside 40pin header, plugin type-c usb cable to PC
 
:2. M5 board disconnect power, press and hold SW4 button beside 40pin header, plugin type-c usb cable to PC
  
 
:[[File:m5_android_install_2.png]]
 
:[[File:m5_android_install_2.png]]
 +
  
 
:3. Click the Start button and wait for upgrade complete.
 
:3. Click the Start button and wait for upgrade complete.
  
 
:[[File:m5_android_install_3.png]]
 
:[[File:m5_android_install_3.png]]
 +
  
 
:4. Unplug the type-c usb and connect to power supply adaptor to startup.
 
:4. Unplug the type-c usb and connect to power supply adaptor to startup.
  
 
:[[File:m5_android_install_4.png]]
 
:[[File:m5_android_install_4.png]]
 +
  
 
:5. Click the Stop button to cancel the upgrade process and close the USB Buring Tool.
 
:5. Click the Stop button to cancel the upgrade process and close the USB Buring Tool.
 +
 +
===Install Image with Burn Card Maker Tool===

Revision as of 23:08, 8 December 2020

Introduction

Amlogic S905X3 Processor

Banana Pi M5 is a new generation single board computer design , use Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) Processor. Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz). support 4GB LPDDR4 and 16G eMMC flash. it have 4 USB 3.0 port,1GbE LAN port.

specifications

  • SoC – Amlogic S905X3 quad-core Cortex-A55 processor @ up to 2.0 GHz with
  • Mali-G31 MP2 GPU @ 650Mhz
  • System Memory – 4GB LPDDR4
  • Storage – 16GB eMMC flash (option up to 64GB), MicroSD slot up to 2TB
  • Video Output – HDMI 2.1 up to 4Kp60 with HDR, CEC, EDID
  • Audio – 3.5mm audio jack, digital HDMI audio
  • Connectivity – Gigabit Ethernet
  • USB – 4x USB 3.0 ports via VL817 hub controller, 1x USB-C port (for power only?)
  • Expansion – 40-pin Raspberry Pi header with 28x GPIO, UART, I2C, SPI, PWM, and power signal (+5V, +3.3V, GND).
  • Debugging – 3-pin debug header
  • Misc – Reset, Power, and U-boot button; power and activity LED’s; IR receiver
  • Power Supply – 5V @3A via USB Type-C port
  • Dimensions – 92x60mm (Not the same as Raspberry Pi PCB size, but they probably included the connectors during measurement)
  • Weight – 48grams

development

Prepare

1. Prepare a usb-serial cable, a 5V/2A adaptor with type-c power supply. The serial cable is used for console debug and type-c cable is used for android image download and ADB debug.
2. Prepare a SDcard at least 8GB for linux development, android only support emmc boot.
3. The SOC rom first boot sequence is emmc, so board can't bootup from SDcard if the emmc is bootable with any image flashed, more info about the image boot sequence please refer to board boot flow.
4.

Android

Prepare

1. Download and install the AML Usb Burning Tool for android image download via type-c, only support windows.
2. Download the AML Burn Card Maker tool for create a bootable sdcard to flash android image to emmc, only support windows.
3. Download the latest android image.

Install Image with Usb Burning Tool

1. Open USB_Burning_Tool.exe, select menu File->Import image, choose the android image file aml_upgrade_package.img.
M5 android install 1.png


2. M5 board disconnect power, press and hold SW4 button beside 40pin header, plugin type-c usb cable to PC
M5 android install 2.png


3. Click the Start button and wait for upgrade complete.
M5 android install 3.png


4. Unplug the type-c usb and connect to power supply adaptor to startup.
M5 android install 4.png


5. Click the Stop button to cancel the upgrade process and close the USB Buring Tool.

Install Image with Burn Card Maker Tool