Difference between revisions of "Getting Started with BPI-F2P"

From Banana Pi Wiki
Jump to: navigation, search
Line 1: Line 1:
=How to Burning and booting steps with SD and eMMC=
=How to Burning and booting steps with SD and eMMC=

Latest revision as of 21:05, 29 January 2021

How to Burning and booting steps with SD and eMMC

Install Win32DiskImager 安装Win32DiskImager

open win32diskimager-1.0.0-install, choose “I accept the agreement “,

BPI-F2P burn 1.png

“Next> “, then choose “Create a desktop shortcut”

“Next> “, after that install the software. Like the follow picture:

首先打开软件win32diskimager-1.0.0-install,选择I accept the agreement ,在选择Next>,然后勾选Create a desktop shortcut,在选择Next>,接下来选择Install开始安装,最后选择Finish,安装完成,如下图所示:

BPI-F2P burn 2.png

Install and set SDFormatterv4. SDFormatterv4 安装配置

Open SDFormatterv4, double-click “Setup”, like the follow picture: 打开文件夹SDFormatterv4,双击setup,如下图所示

BPI-F2P burn 3.png

“next step” , go in Installation directory and choose” Default installation”,

“next step” , choose installation again


首先选择“下一步”,进入安装目录选择(默认安装目录),然后在选择“下一步 ”,再次选择“安装”等待安装结束,最后选择“完成”自动退出安装窗口,SDFormatterv4安装完成。


BPI-F2P burn 4.png

Install the SD card in card reader, install the card reader in PC, then open SDFormatterv4, like the follow picture:


BPI-F2P burn 5.png

Choose” Drive (according to PC display)

Choose “Option settings”, and set the “adjust Logical size” to “ON”,like the follow picture:


BPI-F2P burn 6.png


Then Format



Burning the image in SD Card, 烧录镜像进SD卡

Dowload Ubuntu Image from the below website:


2021-01-29-ubuntu-mate-20.04.1-desktop-armhf-ext4-v5.4.35-bpi-f2p.img.zip: Ubuntu Desktop system, Support HDMI interface to display Desktop. 2021-01-29-ubuntu-server-20.04.1-armhf-ext4-v5.4.35-bpi-f2p.img.zip: Ubuntu Server System, it don’t include Desktop, only support serial console.

Firstly please Decompress the zip file, get the burning image file.


Install the SD which has formatted in card reader, and install the card reader in PC

Open Win32DiskImager, choose device and image file, then burn in. Then choose “OK” (cover), like the follow picture:

After finish, the page will show “ OK”


BPI-F2P burn 7.png

BPI-F2P burn 8.png

How to boot from SD card, SD卡启动操作步骤

After finish burning, install the SD card in F2p Board, then it can boot 烧录完成,将SD卡插入F2p开发板启动。

Serial Console Output: 调试串口输出:

BPI-F2P burn 9.png

HDMI Interface Display:


BPI-F2P burn 10.jpg

How to boot form EMMC, EMMC启动步骤

1.Burning image烧录镜像

Firstly Burning 20201-01-29-ubuntu-mate-20.04.1-desktop-armhf-ext4-v5.4.35-bpi-f2p.img in SD card and boot up. Refer to the below picture:

Console Serial, Username: root, Password: bananapi

先将2021-01-29-ubuntu-mate-20.04.1-desktop-armhf-ext4-v5.4.35-bpi-f2p.img 烧录到SD卡启动。如下图:

调试串口, 用户名:root, 密码:bananapi

BPI-F2P burn 11.jpg

2.Copy the same image compress file you want in USB flash disk volume root directory, and plugin the USB flash disk in b2p board’s USB port.



3.Mount USB flash disk to /mnt挂载U盘到 /mnt

Input instruction输入指令:mount -t vfat /dev/sda1 /mnt

Input instructionto USB flash disk输入指令进入U盘:cd /mnt

4.Burning the image to EMMC烧录镜像到EMMC

 Input the below instructions, like the follow picture 输入如下1条指令如下图:

unzip –p 2021-01-29-ubuntu-mate-20.04.1-desktop-armhf-ext4-v5.4.35-bpi-f2p.img.zip | dd of=/dev/mmcblk0

echo 0 > /sys/block/mmcblk0boot0/force_ro

cd /root/

dd if=xboot.img of=/dev/mmcblk0boot0

mmc bootpart enable 1 1 /dev/mmcblk0

mmc extcsd read /dev/mmcblk0 | grep PARTITION_CONFIG



BPI-F2P burn 12.jpg

5.Finish the burning, remove SD card and USB flash disk, Push the Red Switch PIN to off, re-power on and boot from EMMC 烧录完成,取出SD卡及U盘,将红色的拨码开关设成off, 重新上电EMMC启动。