Difference between revisions of "EAI80 Burning Steps (Elementary)"

From Banana Pi Wiki
Jump to: navigation, search
Line 13: Line 13:
 
Step 3:  
 
Step 3:  
 
Type minicom (press enter), press CTRL-A Z W then press space button and reset button both simultaneously then press enter.
 
Type minicom (press enter), press CTRL-A Z W then press space button and reset button both simultaneously then press enter.
 +
 +
[[File:EAI80_burn_3.jpg]]
  
  
 
Step 4: Type help (checking upgrade mode)
 
Step 4: Type help (checking upgrade mode)
 +
 +
[[File:EAI80_burn_4.jpg]]
  
  
Line 21: Line 25:
 
Command: usb format (press enter)  go (press enter)
 
Command: usb format (press enter)  go (press enter)
  
 +
[[File:EAI80_burn_5.jpg]]
  
 +
[[File:EAI80_burn_51.jpg]]
  
  

Revision as of 23:53, 28 September 2020

USB thumb flash format steps: Step 1: EAI80 connects a type C cable with a NB then connects a battery then connects a serial cable with EAI80 GPIO pin6, pin8, pin10.

EAI80 burn 1.jpg


Step 2: Open the terminal then login root then command: ls /dev/ttyUSB* (for checking ttyUSB0 and ttyUSB1)

EAI80 burn 2.jpg

Step 3: Type minicom (press enter), press CTRL-A Z W then press space button and reset button both simultaneously then press enter.

EAI80 burn 3.jpg


Step 4: Type help (checking upgrade mode)

EAI80 burn 4.jpg


Step 5: Command: usb format (press enter) go (press enter)

EAI80 burn 5.jpg

EAI80 burn 51.jpg


Saving image from EAI80 flash to USB thumb flash steps: Step 1: Command: minicom –D /dev/ttyUSB1 –b 115200 press CTRL-A Z W then press space button and reset button both simultaneously press enter.


Step 2: Command: usb save 1:bpi.bin (press enter) -> go (press enter) Remove type C cable -> insert the thumb flash (start saving)


Restore image from USB thumb flash to EAI80 flash steps:

Step 1: Command: usb restore 1:bpi.bin (press enter) go (press enter)