EAI80 Burning Steps (Elementary)

From Banana Pi Wiki
Revision as of 23:51, 28 September 2020 by Sinovoip (talk | contribs)
Jump to: navigation, search

USB thumb flash format steps: Step 1: EAI80 connects a type C cable with a NB then connects a battery then connects a serial cable with EAI80 GPIO pin6, pin8, pin10.

EAI80 burn 1.jpg


Step 2: Open the terminal then login root then command: ls /dev/ttyUSB* (for checking ttyUSB0 and ttyUSB1)

EAI80 burn 2.jpg

Step 3: Type minicom (press enter), press CTRL-A Z W then press space button and reset button both simultaneously then press enter.


Step 4: Type help (checking upgrade mode)


Step 5: Command: usb format (press enter) go (press enter)



Saving image from EAI80 flash to USB thumb flash steps: Step 1: Command: minicom –D /dev/ttyUSB1 –b 115200 press CTRL-A Z W then press space button and reset button both simultaneously press enter.


Step 2: Command: usb save 1:bpi.bin (press enter) -> go (press enter) Remove type C cable -> insert the thumb flash (start saving)


Restore image from USB thumb flash to EAI80 flash steps:

Step 1: Command: usb restore 1:bpi.bin (press enter) go (press enter)