Banana Pi BPI-R2

From Banana Pi Wiki
Revision as of 20:50, 6 May 2018 by Sinovoip (talk | contribs) (BPI-R2 GPIO Pin define)
Jump to: navigation, search

Summary

Introduction

The Banana Pi R2 is a router based development board, which can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. It has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Getting Start

Key Features

  • MediaTek MT7623N, Quad-core ARM Cortex-A7
  • Mali 450 MP4 GPU
  • 2G DDR3 SDRAM
  • Mini PCIE interface.
  • support 2 SATA interface
  • MicroSD slot supports up to 256GB expansion
  • 8G eMMC flash (option 16/32/64G)
  • MIPI display interface support
  • 5 port 10/100/1000 Mb Ethernet port
  • (2) USB 3.0 and (1) USB 2.0 otg port
  • 1080P high-definition video playback
  • HDMI port and multi-channel audio output
  • WIFI&Bluetooth 4.1 with 802.11B/G/N onboard

Hardware Revision

Hardware interface

R2.jpg

Hardware spec

Banana Pi R2
CPU MediaTek MT7623N, Quad-code ARM Cortex-A7
GPU Mali 450 MP4 GPU
Memory 2G DDR3 SDRAM
Storage On Board 8GB eMMC Flash, Micro SD-Card slot, Two SATA 2.0 Port (USB-to-SATA bridge)
Network 10/100/1000 Mbit/s Ethernet (MT7530) + Wi-Fi 802.11 b/g/n 2.4G/5G (MT6625L) + Bluetooth BT4.1 with MTK6625L chip
Display(s) HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200; MIPI Display Serial Interface (DSI) interface(4 data lanes)
Video decoder(s) Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc. H.264 high-profile 1080p@60fps, HEVC/H.265 1080P@60fps
Audio Output(s) HDMI & I2S
USB ports USB 3.0 PORT (x2), USB OTG (x1)
PCIE 1 pcie interface & 1 pcie pin define interface
Remote IR Receiver (x1)
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM
Switches Reset button, Power button, U-boot button
LED Power Status and 8P8C
Power Source 5 volt @2A via DC Power and/or Micro USB (OTG)
Size & Weight 148 mm × 100.5mm 100g
OS OpenWRT, Debian, Ubuntu, Raspbian and others OS

BPI-R2 GPIO Pin define

Banana Pi BPI-R2 40-pin GPIO define:

Banana Pi BPI-R2 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

Gpio define.png

BPI-R2 40 PIN GPIO define:

40 PIN GPIO of Banana pi BPI-M2 Ultra
GPIO Pin Name Default Function
CON1-P01 VCC-3V3
CON1-P02 VCC-5V
CON1-P03 GPIO75
CON1-P04 VCC-5V
CON1-P05 GPIO76
CON1-P06 GND
CON1-P07 GPIO206
CON1-P08 GPIO80
CON1-P09 GND
CON1-P10 GPIO81
CON1-P11 GPIO80
CON1-P12 GPIO74
CON1-P13 GPIO79
CON1-P14 GND
CON1-P15 GPIO205
CON1-P16 GPIO25
CON1-P17 VCC-3V3
CON1-P18 GPIO24
CON1-P19 GPIO56
CON1-P20 GND
CON1-P21 SPI0\_MI GPIO55
CON1-P22 PCM\_CLK GPIO18
CON1-P23 SPI0\_CK GPIO54
CON1-P24 SPI0\_CSN GPIO53
CON1-P25 GND
CON1-P26 PCM\_RX GPIO20
CON1-P27 I2C\_SDA1 GPIO57
CON1-P28 I2C\_SCL1 GPIO58
CON1-P29 PCM\_RST GPIO22
CON1-P30 GND
CON1-P31 SPDIF\_OUT GPIO200
CON1-P32 PCM\_TX GPIO21
CON1-P33 I2S0\_MCLK GPIO126
CON1-P34 GND
CON1-P35 GPIO73
CON1-P36 GPIO19
CON1-P37 GPIO202
CON1-P38 GPIO72
CON1-P39 GND
CON1-P40 I2S0\_DATA\_OUT GPI049

Image Release

Ubuntu

Kernel 4.14

Kernel 4.4

OpenWrt

Kernel 4.9

FAQ