Difference between revisions of "Banana Pi BPI-R2"

From Banana Pi Wiki
Jump to: navigation, search
(Hardware Revision)
(Hardware Revision)
Line 15: Line 15:
 
== Hardware interface==
 
== Hardware interface==
 
[[Image:R2.jpg]]
 
[[Image:R2.jpg]]
 +
 +
== Hardware spec==
 +
 +
{| class="wikitable"
 +
|-
 +
!
 +
! Banana Pi R2
 +
|-
 +
! CPU
 +
| MediaTek MT7623N, Quad-code ARM Cortex-A7
 +
|-
 +
! GPU
 +
| Mali 450 MP4 GPU
 +
|-
 +
! Memory
 +
| 2G DDR3 SDRAM
 +
|-
 +
! Storage
 +
| On Board 8GB eMMC Flash, Micro SD-Card slot, Two SATA 2.0 Port (USB-to-SATA bridge)
 +
|-
 +
! Network
 +
| 10/100/1000 Mbit/s Ethernet (MT7530) + Wi-Fi 802.11 b/g/n 2.4G/5G (MT6625L) + Bluetooth BT4.1 with MTK6625L chip
 +
|-
 +
! Display(s)
 +
| HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200; MIPI Display Serial Interface (DSI) interface(4 data lanes)
 +
|-
 +
! Video decoder(s)
 +
| Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc. H.264 high-profile 1080p@60fps, HEVC/H.265 1080P@60fps
 +
|-
 +
! Audio Output(s)
 +
| HDMI & I2S
 +
|-
 +
! USB ports
 +
| USB 3.0 PORT (x2), USB OTG (x1)
 +
|-
 +
! PCIE
 +
| 1 pcie interface & 1 pcie pin define interface
 +
|-
 +
! Remote
 +
| IR Receiver (x1)
 +
|-
 +
! GPIO
 +
| 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM
 +
|-
 +
! Switches
 +
| Reset button, Power button, U-boot button
 +
|-
 +
! LED
 +
| Power Status and 8P8C
 +
|-
 +
! Power Source
 +
| 5 volt @2A via DC Power and/or Micro USB (OTG)
 +
|-
 +
! Size & Weight
 +
| 148 mm × 100.5mm 100g
 +
|-
 +
! OS
 +
| OpenWRT, Debian, Ubuntu, Raspbian and others OS
 +
|}
  
 
=Image Release=
 
=Image Release=

Revision as of 20:35, 6 May 2018

Summary

Introduction

The Banana Pi R2 is a router based development board, which can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. It has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Getting Start

Hardware Revision

Hardware interface

R2.jpg

Hardware spec

Banana Pi R2
CPU MediaTek MT7623N, Quad-code ARM Cortex-A7
GPU Mali 450 MP4 GPU
Memory 2G DDR3 SDRAM
Storage On Board 8GB eMMC Flash, Micro SD-Card slot, Two SATA 2.0 Port (USB-to-SATA bridge)
Network 10/100/1000 Mbit/s Ethernet (MT7530) + Wi-Fi 802.11 b/g/n 2.4G/5G (MT6625L) + Bluetooth BT4.1 with MTK6625L chip
Display(s) HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200; MIPI Display Serial Interface (DSI) interface(4 data lanes)
Video decoder(s) Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc. H.264 high-profile 1080p@60fps, HEVC/H.265 1080P@60fps
Audio Output(s) HDMI & I2S
USB ports USB 3.0 PORT (x2), USB OTG (x1)
PCIE 1 pcie interface & 1 pcie pin define interface
Remote IR Receiver (x1)
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM
Switches Reset button, Power button, U-boot button
LED Power Status and 8P8C
Power Source 5 volt @2A via DC Power and/or Micro USB (OTG)
Size & Weight 148 mm × 100.5mm 100g
OS OpenWRT, Debian, Ubuntu, Raspbian and others OS

Image Release

Ubuntu

Kernel 4.14

  • Image Link:
  • Source Code Github Repo:
  • Forum thread:

Kernel 4.4

  • Image Link:
  • Source Code Github Repo:
  • Forum thread:

OpenWrt

Kernel 4.9

FAQ