Difference between revisions of "Banana Pi BPI-R1"

From Banana Pi Wiki
Jump to: navigation, search
(Introduction)
(Key Features)
Line 12: Line 12:
 
* Mali-400 MP2 with Open GL ES 2.0/1.1.
 
* Mali-400 MP2 with Open GL ES 2.0/1.1.
 
* 1 GB DDR3 memory.
 
* 1 GB DDR3 memory.
 +
* 1x SATA interface.
 
* 4x Gigabit LAN 1x Gigabit WAN
 
* 4x Gigabit LAN 1x Gigabit WAN
  

Revision as of 23:13, 6 May 2018

Introduction

The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.

The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.

Key Features

  • Allwinner A20 Dual-core 1.0GHz CPU
  • Mali-400 MP2 with Open GL ES 2.0/1.1.
  • 1 GB DDR3 memory.
  • 1x SATA interface.
  • 4x Gigabit LAN 1x Gigabit WAN

Getting Start

Hardware

Hardware interfact

BPI-R1 front.png

BPI-R1 back.jpg

Hardware spec

GPIO PIN define

Banana Pi BPI-R1 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

Gpio define.png

Software

Android

Linux

Opnewrt

TinaLinux

Allwinner Tina-IoT os for BPI-M2 Ultra/BPI-M2 Berry

Development

Basic Development

Resources

Release

FAQ