Difference between revisions of "Banana Pi BPI-M5"

From Banana Pi Wiki
Jump to: navigation, search
(BPI-M5 VS Odroid C4 VS Raspberry Pi 4)
(BPI-M5 VS Odroid C4 VS Raspberry Pi 4)
Line 64: Line 64:
 
|-
 
|-
 
|Processor ||Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz || Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz || Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
 
|Processor ||Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz || Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz || Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
 +
|-
 
|GPU ||Mali-G31 MP2 GPU || Mali-G31 MP2 GPU || Broadcom VideoCore VI
 
|GPU ||Mali-G31 MP2 GPU || Mali-G31 MP2 GPU || Broadcom VideoCore VI
 +
|-
 
|RAM ||4GB LPDDR4 ||DDR4 memory (4GiB) ||2GB, 4GB or 8GB LPDDR4-3200 SDRAM
 
|RAM ||4GB LPDDR4 ||DDR4 memory (4GiB) ||2GB, 4GB or 8GB LPDDR4-3200 SDRAM
 +
|-
 
|Storage || micro SD card slot & 16GB eMMC flash on board ||micro SD card slot , non EMMC ||micro SD card slot, non EMMC  
 
|Storage || micro SD card slot & 16GB eMMC flash on board ||micro SD card slot , non EMMC ||micro SD card slot, non EMMC  
 +
|-
 
|Network || GbE ,Optional WiFi USB dongle || GbE ||GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
 
|Network || GbE ,Optional WiFi USB dongle || GbE ||GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
 +
|-
 
|Video Output || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 2 × micro-HDMI 2.0
 
|Video Output || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 2 × micro-HDMI 2.0
 +
|-
 
|Audio Output ||3.5mm jack and 1 x HDMI digital output || N/A || 3.5 mm analogue audio-video jack
 
|Audio Output ||3.5mm jack and 1 x HDMI digital output || N/A || 3.5 mm analogue audio-video jack
 +
|-
 
|DSI ||N/A ||N/A || 2-lane MIPI DSI display port
 
|DSI ||N/A ||N/A || 2-lane MIPI DSI display port
 +
|-
 
|CSI ||N/A ||N/A ||2-lane MIPI CSI camera port
 
|CSI ||N/A ||N/A ||2-lane MIPI CSI camera port
 +
|-
 
|USB ||USB 3.0 x 4 TYPE C ||USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) || 2 USB 3.0 ports; 2 USB 2.0 ports;
 
|USB ||USB 3.0 x 4 TYPE C ||USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) || 2 USB 3.0 ports; 2 USB 2.0 ports;
 +
|-
 
|Power ||5 volt @3A via Micro USB (TYPE C) ||1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) || 5V DC via USB-C connector (minimum 3A*)
 
|Power ||5 volt @3A via Micro USB (TYPE C) ||1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) || 5V DC via USB-C connector (minimum 3A*)
 +
|-
 
|IR ||Yes ||Yes ||N/A
 
|IR ||Yes ||Yes ||N/A
 +
|-
 
|GPIO ||40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM || 40 x GPIO pins ||40-pin GPIO header, populated
 
|GPIO ||40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM || 40 x GPIO pins ||40-pin GPIO header, populated
 +
|-
 
|Button ||Reset, user and U-boot || N/A || N/A ||
 
|Button ||Reset, user and U-boot || N/A || N/A ||
 +
|-
 
|LED || Power Status and Activity status || Power Status and Activity status || Power Status and Activity status
 
|LED || Power Status and Activity status || Power Status and Activity status || Power Status and Activity status
 +
|-
 
|Dimensions & weight ||85x56mm, 48g || ||88 mm × 58 mm × 19.5 mm, 46 g
 
|Dimensions & weight ||85x56mm, 48g || ||88 mm × 58 mm × 19.5 mm, 46 g
 +
|-
 
|Linux Support || Linux & Android ||Linux & Android ||Linux & Android
 
|Linux Support || Linux & Android ||Linux & Android ||Linux & Android
  

Revision as of 21:14, 29 September 2020

Introduction

Amlogic S905X3 Processor

Banana Pi BPI-M5 is a new generation single board computer design , use Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) Processor. Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz). support 4GB LPDDR4 and 16G eMMC flash. it have 4 USB 3.0 port,1GbE LAN port.

Banana Pi BPI-M5 7.jpg

Key Features

  • Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) Processor
  • Mali-G31 GPU
  • 4GB LPDDR4
  • 16GB eMMC flash on board.
  • 4 USB 3.0 port
  • 1 GbE LAN por
  • HDMI output

Getting Start

Hardware

Hardware interfact

File:Banana Pi BPI-M5 interface.jpg

Hardware spec

HardWare Specification of Banana pi BPI-M5
CPU Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz)
GPU Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)
Memory 4 GB LPDDR4
Storage MicroSD slot with support for up to 256GB expansion and 16G eMMC flash with support for up to 64GB
Network 10/100/1000 Mbit/s Ethernet ,Optional WiFi USB dongle
Video Output(s) 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
Audio Output(s) 3.5mm jack and 1 x HDMI digital output
USB ports USB 3.0 PORT (x4)
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM
Switches Reset, Power and U-boot
LED Power Status and Activity status
Power Source 5 volt @3A via Micro USB (TYPE C)
Size & Weight 92x60mm, 48g
OS Android and Linux

BPI-M5 VS Odroid C4 VS Raspberry Pi 4

BPI-M5 VS Odroid C4 VS RPI 4
Processor Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
GPU Mali-G31 MP2 GPU Mali-G31 MP2 GPU Broadcom VideoCore VI
RAM 4GB LPDDR4 DDR4 memory (4GiB) 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
Storage micro SD card slot & 16GB eMMC flash on board micro SD card slot , non EMMC micro SD card slot, non EMMC
Network GbE ,Optional WiFi USB dongle GbE GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Video Output 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) 2 × micro-HDMI 2.0
Audio Output 3.5mm jack and 1 x HDMI digital output N/A 3.5 mm analogue audio-video jack
DSI N/A N/A 2-lane MIPI DSI display port
CSI N/A N/A 2-lane MIPI CSI camera port
USB USB 3.0 x 4 TYPE C USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) 2 USB 3.0 ports; 2 USB 2.0 ports;
Power 5 volt @3A via Micro USB (TYPE C) 1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) 5V DC via USB-C connector (minimum 3A*)
IR Yes Yes N/A
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM 40 x GPIO pins 40-pin GPIO header, populated
Button Reset, user and U-boot N/A N/A
LED Power Status and Activity status Power Status and Activity status Power Status and Activity status
Dimensions & weight 85x56mm, 48g 88 mm × 58 mm × 19.5 mm, 46 g
Linux Support Linux & Android Linux & Android Linux & Android

GPIO PIN define

Resources

Source code

Android

Linux

documents

Image Release