Difference between revisions of "Banana Pi BPI-M4"

From Banana Pi Wiki
Jump to: navigation, search
(Hardware spec)
(Hardware spec)
Line 20: Line 20:
 
| GPU||Mali 470 MP4 GPU
 
| GPU||Mali 470 MP4 GPU
 
|-
 
|-
| Memory|| 1GB LPDDR3 (option 2 GB)
+
| Memory|| 1 GB DDR4 (option 2 GB)
 
|-
 
|-
 
| Storage|| MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB
 
| Storage|| MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB
 
|-
 
|-
| Network|| 10/100/1000 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n  + Bluetooth 4.0
+
| Network|| 10/100 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n/AC + Bluetooth 4.2
 
|-
 
|-
 
|Video Input(s)|| A CSI input connector allows for the connection of a designed camera module
 
|Video Input(s)|| A CSI input connector allows for the connection of a designed camera module

Revision as of 19:39, 12 February 2019

Introduction

Key Features

Getting Start

Hardware

Hardware interfact

Banana Pi BPI-M4 interface.JPG

Hardware spec

HardWare Specification of Banana pi BPI-M64
CPU Realtek RTD1395 ARM Cortex-A53 Quad-Core 64 Bit
GPU Mali 470 MP4 GPU
Memory 1 GB DDR4 (option 2 GB)
Storage MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB
Network 10/100 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n/AC + Bluetooth 4.2
Video Input(s) A CSI input connector allows for the connection of a designed camera module
Video Output(s) 1080p capable HDMI port and multi-channel audio output (NO H./X.265 capabilities)
Audio Input(s) On board microphone
Audio Output(s) 3.5mm jack and HDMI
USB ports USB 2.0 PORT (x2), USB OTG (x1)
Remote IR Receiver
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM
Switches Reset, Power and U-boot
LED Power Status and 8P8C
Power Source 5 volt @2A via DC Power and/or Micro USB (OTG)
Size & Weight 92x60mm, 48g
OS Android and Linux

GPIO PIN define

Software

Android