Banana Pi BPI-M2+

From Banana Pi Wiki
Revision as of 23:47, 6 May 2018 by Sinovoip (talk | contribs) (Key Features)
Jump to: navigation, search

Introduction

Key Features

  • Allwinner H3 Quad-core 1.2GHz Cortex-A7
  • 1GB DDR3
  • 8GB eMMC onboard
  • WiFi and BlueTooth onboard
  • 10/100/1000Mbps Ethernet Port
  • CSI camera interface

Getting Start

Hardware

Hardware interfact

BPI-M2 plus interface.jpg

Hardware spec

HardWare Specification of Banana Pi M2+(Plus)
CPU H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU Mali400MP2 GPU @600 MHz,Supports OpenGL ES 2.0
Memory 1GB DDR3 (shared with GPU)
Flash 8GB eMMC flash onboard
Network 10/100/1000 Ethernet
Onboard WIFI SDIO AP6212(option AP6181 AP6335)
Video Input A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL, 3 Supports SM pixel camera sensor, 4 Supports video capture solution up to 1080p@30fps
Video Outputs Supports HDMI output with HDCP, Supports HDMI CEC, Supports HDMI 30 function, Integrated CVBS, Supports simultaneous output of HDMI and CVBS
Audio Outputs HDMI
Power 5V/2A DC input can supply power, but USB OTG input don’t supply power
USB 2.0 ports two USB 2.0 HOST, one USB 2.0 OTG
GPIO 40 Pins Header,compatible with Raspberry Pi B+
LED Power led & Status led
IR IR input on board
OS Android, Ubuntu, Debian, Raspberry Pi Image

GPIO PIN define

Banana Pi BPI-M2+ (BPI-M2 Plus) has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

Gpio define.png

Software

Android

Linux

Opnewrt

TinaLinux

Allwinner Tina-IoT os for BPI-M2 Ultra/BPI-M2 Berry

Development

Basic Development

Resources

Release

FAQ