Banana Pi BPI-M2+

From Banana Pi Wiki
Revision as of 23:33, 6 May 2018 by Sinovoip (talk | contribs) (Hardware spec)
Jump to: navigation, search

Introduction

Key Features

Getting Start

Hardware

Hardware interfact

BPI-M2 plus interface.jpg

Hardware spec

Banana Pi M2+(Plus)
CPU H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU Mali400MP2 GPU @600 MHz,Supports OpenGL ES 2.0
Memory 1GB DDR3 (shared with GPU)
Onboard Network 10/100/1000 Ethernet
Onboard WIFI SDIO AP6212(option AP6181 AP6335)
Video Input A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL, 3 Supports SM pixel camera sensor, 4 Supports video capture solution up to 1080p@30fps
Video Outputs Supports HDMI output with HDCP, Supports HDMI CEC, Supports HDMI 30 function, Integrated CVBS, Supports simultaneous output of HDMI and CVBS
Audio Outputs HDMI
Power Source DC input can supply power, but USB OTG input don’t supply power
USB 2.0 ports two USB 2.0 HOST, one USB 2.0 OTG
GPIO 40 Pins Header,compatible with Raspberry Pi B+
LED Power led & Status led
IR IR input on board
OS Android, Ubuntu, Debian, Raspberry Pi Image

GPIO PIN define

Banana Pi BPI-M2+ (BPI-M2 Plus) has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

Gpio define.png

Software

Android

Linux

Opnewrt

TinaLinux

Allwinner Tina-IoT os for BPI-M2 Ultra/BPI-M2 Berry

Development

Basic Development

Resources

Release

FAQ