Banana Pi BPI-M1

From Banana Pi Wiki
Revision as of 01:19, 7 May 2018 by Sinovoip (talk | contribs) (GPIO PIN define)
Jump to: navigation, search

Introduction

The Banana Pi BPI-M1 is a business card-sized and low-power single-board computer featuring a high performance AllWinner A20 dual-core SoC at 1 GHz, 1 GB of DDR3 SDRAM, Gigabit Ethernet, SATA, USB, and HDMI connections. It can run a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian.

The BPI-M1 is our first product in our goal of creating an open source devlopment board community. With a Banana Pi, we want you to explore and experience the world of DIY projects and portable computing. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.

Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding.

Key Features

  • Allwinner A20 Dual-core 1.0GHz CPU
  • Mali-400 MP2 with Open GL ES 2.0/1.1.
  • 1 GB DDR3 memory.
  • 1x SATA interface.
  • 1x Gigabit LAN
  • 1x USB otg and 2x USB 2.0
  • 1X MIC
  • AV vide out
  • HDMI out
  • IR
  • CSI camera interface
  • DSI display interface
  • 26 PIN gpio

Getting Start

Hardware

Hardware interfact

BPI-M1 interface.jpg

Hardware spec

Banana Pi BPI-M1
CPU A20 ARM Cortex -A7 Dual-Core
GPU ARM Mali 400 MP2; Complies with OpenGL ES 2.0/1.1
Memory 1GB DDR3
Network 10/100/1000 Ethernet 8P8C (1000BASE-T)
Video Input A CSI input connector allows for the connection of a designed camera module
Video Outputs HDMI, CVBS, LVDS/RGB
Audio Outputs 3.5mm jack and HDMI
Power Source 5 volts DC via Micro USB or GPIO
USB 2.0 ports 2 (direct from Allwinner A20 chip)
GPIO GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PWM, +3.3V, +5V, GND
LED Power Key & 8P8C
Storage SATA 2.0,

GPIO PIN define

Banana Pi BPI-M1 has a 26-pin GPIO header that matches that of the Model A and Model B Raspberry Pi. Following is the Banana Pi GPIO Pinout:

BPI-M1 26 pin.png

Note: 5V1,5V2 only support output,not support input

CSI Camera Connector specification:

CSI Camera Connector The CSI Camera Connector is a 40-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin definitions of the CSI interface are shown as below. This is marked on the Banana Pi board as “CON1″.

40 PIN GPIO of Banana pi BPI-M2 Ultra
CSI GPIO Pin Pin Name GPIO
CON1 P01 LINEINL
CON1 P02 LINEINR
CON1 P03 VCC-CSI
CON1 P04 ADC\_X1
CON1 P05 GND
CON1 P06 ADC\_X2
CON1 P07 FMINL
CON1 P08 ADC\_Y1
CON1 P09 FMINR
CON1 P10 ADC\_Y2
CON1 P11 GND
CON1 P12 PH17
CON1 P13 LRADC0
CON1 P14 TWI1-SDA PB19
CON1 P15 LRADC1
CON1 P16 TWI1-SCK PB18
CON1 P17 CSI-D0 PE4
CON1 P18 CSI0-STBY-EN PH19
CON1 P19 CSI0-D1 PE5
CON1 P20 CSI-PCLK PE0
CON1 P21 CSI-D2 PE6
CON1 P22 CSI0-PWR-EN PH16
CON1 P23 CSI-D3 PE7
CON1 P24 CSI0-MCLK PE1
CON1 P25 CSI-D4 PE8
CON1 P26 PH14
CON1 P27 CSI-D5 PE9
CON1 P28 CSI-VSYNC PE3
CON1 P29 CSI-D6 PE10
CON1 P30 CSI-HSYNC PE2
CON1 P31 CSI-D7 PE11
CON1 P32 CSI1-STBY-EN PH18
CON1 P33 RESET\#
CON1 P34 CSI1-RESET\# PH13
CON1 P35 CSI-IO0 PH11
CON1 P36 HPR
CON1 P37 HPL
CON1 P38 IPSOUT
CON1 P39 GND
CON1 P40 IPSOUT

Software

Android

Linux

Opnewrt

Development

Basic Development

Documents

Release

FAQ