Banana Pi BPI-M1

From Banana Pi Wiki
Revision as of 00:19, 7 May 2018 by Sinovoip (talk | contribs) (Key Features)
Jump to: navigation, search

Introduction

The Banana Pi BPI-M1 is a business card-sized and low-power single-board computer featuring a high performance AllWinner A20 dual-core SoC at 1 GHz, 1 GB of DDR3 SDRAM, Gigabit Ethernet, SATA, USB, and HDMI connections. It can run a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian.

The BPI-M1 is our first product in our goal of creating an open source devlopment board community. With a Banana Pi, we want you to explore and experience the world of DIY projects and portable computing. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.

Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding.

Key Features

  • Allwinner A20 Dual-core 1.0GHz CPU
  • Mali-400 MP2 with Open GL ES 2.0/1.1.
  • 1 GB DDR3 memory.
  • 1x SATA interface.
  • 1x Gigabit LAN
  • 1X MIC
  • AV vide out
  • HDMI out
  • CSI camera interface
  • DSI display interface
  • 26 PIN gpio

Getting Start

Hardware

Hardware interfact

BPI-M1 interface.jpg

Hardware spec

Banana Pi BPI-M1
CPU A20 ARM Cortex -A7 Dual-Core
GPU ARM Mali 400 MP2; Complies with OpenGL ES 2.0/1.1
Memory 1GB DDR3
Network 10/100/1000 Ethernet 8P8C (1000BASE-T)
Video Input A CSI input connector allows for the connection of a designed camera module
Video Outputs HDMI, CVBS, LVDS/RGB
Audio Outputs 3.5mm jack and HDMI
Power Source 5 volts DC via Micro USB or GPIO
USB 2.0 ports 2 (direct from Allwinner A20 chip)
GPIO GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PWM, +3.3V, +5V, GND
LED Power Key & 8P8C
Storage SATA 2.0,

GPIO PIN define

Banana Pi BPI-M1 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

Gpio define.png

Software

Android

Linux

Opnewrt

Development

Basic Development

Documents

Release

FAQ