Banana Pi BPI-M1+

From Banana Pi Wiki
Revision as of 22:55, 6 May 2018 by Sinovoip (talk | contribs) (GPIO PIN define)
Jump to: navigation, search

Introduction

Key Features

Hardware

Hardware interfact

BPI-M1 plus interface.jpg

Hardware spec

Banana Pi M1+
CPU A20 ARM Cortex -A7 Dual-Core
GPU ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory 1GB DDR3
Network 10/100/1000 Ethernet 8P8C, Wi-Fi
Video Input A CSI input connector allows for the connection of a designed camera module
Video Outputs HDMI, CVBS, LVDS/RGB
Audio Outputs 3.5mm jack and HDMI
Power Source 5 volt via Micro USB (DC in only) and / or Micro USB OTG
USB 2.0 ports 2(direct from Allwinner A20 chip)
GPIO GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PWM, +3.3V, +5V, GND
LED Power Key & 8P8C
Storage SATA 2.0
OS Android 4.4, Android 4.2, Raspbian, Lubuntu, Open Suse, Debian

GPIO PIN define

Banana Pi BPI-M1+ has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:

Gpio define.png

Software

Development

Basic Development

Release

FAQ