Banana Pi BPI-F2S

From Banana Pi Wiki
Revision as of 19:45, 10 November 2019 by Sinovoip (talk | contribs) (FPGA extend board)
Jump to: navigation, search

Introduction

File:Banana PI BPI-F2S 4.JPG
sunplus SF7021 chip design
File:Banana PI BPI-F2S 5.JPG
Industrial operating
SunPlus SP7021 Diagram

Banana Pi BPI-F2S is the first board with Banana Pi team and SunPlus, this is a industrial-grade board. use Plus1(sp7021) design.

Application direction

  • Industrial Internet control
  • IoT
  • FPGA education and development
  • Vehicular networking technology and applications

about SunPlus sf7021

SunPlus sf7021 is a revolutionary SoC that has the power of a Linux-grade chip and the integration simplicity of a microcontroller.it with ARM Cortex-A7 Quad core,ARM926 real-time core,8051 low-power core

Conceived by Sunplus Technology in collaboration with Tibbo Technology, PLUS1 takes all the sophisticated elements typically found in modern industrial-grade embedded Linux chips, adds a plethora of features targeting IoT and industrial control applications, and delivers the resulting design in a simple microcontroller-like package that needs few external components, simplifies the schematic diagram, and reduces the PCB complexity.

SP7021 is a SoC solution of industrial control. It meets customers’full demand on function but with low cost so that will improve customers’ competitiveness in the market. SP7021 provides rich GPIOs, storage and USB interface. And it provides MIPI CSI interface for video input and HDMI interface for video output. It also provides FPGA interface for function extension. SP7021 also has 4 Ethernet ports providing customers a high competitive solution.

characteristics of the SP7021

  • Easy-to-use LQFP package.
  • Quad-core 1GHz Cortex-A7 CPU, plus A926 and 8051 cores.
  • Single 3.3V power*.
  • Integrated 128MB or 512MB DDR3 DRAM.
  • Eight 8-bit 5V-tolerant IO ports, plus one high-current port.
  • Flexible Peripheral Multiplexing (PinMux).
  • Dual PinMuxable Ethernet MACs.
  • Four PinMuxable Enhanced UARTs, plus one console UART.
  • Industrial operating temperature range: -40C ~ +85C.
  • Low EMI simplifies certification.
  • Modern, Yocto-based Linux distribution.
  • 10-year supply guarantee.
  • Robust ready-to-run modern Linux distribution available
  • And much more...

Hardware

Hardware interface

Hardware spec

FPGA extend board

FPGA Module with Xilinx Artix-7 100T (Variant 2D), 2 x 50 Pin, 1.8V only supply

Key Features:

  • Xilinx Artix-7 XC7A100T-2CSG324C
  • Commercial temperature grade (industrial on request)
  • 32 MByte Flash memory
  • 2 x 50 pin headers with 2.54 mm pitch, ideal for breadboard use
  • 1.8 V single supply with on board voltage regulators
  • 95 I/O's (42 + 42 + 3 + 8)
  • 25 MHz system clock (100 MHz can be customized on request)
  • I2C EEPROM
  • 7.3 x 3.5 cm form factor
  • JTAG/UART connector
  • One user LED
  • optional HyperRAM (8 bis 32 MByte) or HyperFlash
  • HyperRAM from Cypress cypress.com/products/hyperram-memory
  • HyperFlash from Cypress cypress.com/products/hyperflash-nor-flash-memory

Software

Source code on github

Resources