Difference between revisions of "Banana Pi BPI-F2"

From Banana Pi Wiki
Jump to: navigation, search
(→‎Hardware spec)
(→‎Hardware spec)
Line 30: Line 30:
 
| On board Network || 10/100/1000Mbps Ethernet \(Realtek RTL8211E/D\)  
 
| On board Network || 10/100/1000Mbps Ethernet \(Realtek RTL8211E/D\)  
 
|-
 
|-
−
| Wifi Module || WiFi 802.11 b/g/n \(AP 6212 module on board\)
+
| Wifi Module ||  
 
|-
 
|-
−
| Bluetooth || BT4.0
+
| Bluetooth ||
 
|-
 
|-
−
| On board Storage || MicroSD \(TF\) card,No eMMC onboard  
+
| On board Storage || MicroSD \(TF\) card,8G eMMC onboard (option 8-64G)
 
|-
 
|-
−
| Display || 4-lane MIPI DSI display,or RGB panel or LVDS panel,TV-out on HDMI V1.4
+
| Display ||  
 
|-
 
|-
−
| Video || Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decode up to 1080P60,support video encodeing:High-deinition\(HD\)H.264 video encoder is up to 1080P@45fps
+
| Video ||  
 
|-
 
|-
−
| Audio outputs || HDMI, analog audio \(via 3.5 mm TRRS jack\), I2S audio \(also potentially for audio input\)
+
| Audio outputs ||
 
|-
 
|-
−
| Camera || A CSI input connector Camera:Supports 8-bit YUV422 CMOS sensor interface,Supports CCIR656 protocol for NTSC and PAL,Supports 5M pixel camera sensor ,Supports video capture solution up to 1080p@30fps
+
| Camera ||  
 
|-
 
|-
−
| Audio input || On board microphone
+
| Audio input ||
 
|-
 
|-
−
| USB || 4 USB 2.0 host, 1 USB 2.0 OTG
+
| USB ||
 
|-
 
|-
−
| Buttons || Reset button, Power button, U-boot button
+
| Buttons ||
 
|-
 
|-
−
| Leds || Power status Led and RJ45 Led
+
| Leds ||  
 
|-
 
|-
 
| IR || No onboard IR receiver
 
| IR || No onboard IR receiver
Line 58: Line 58:
 
| battery || No 3.7V lithium battery power support
 
| battery || No 3.7V lithium battery power support
 
|-
 
|-
−
| Sizes || 85mmX56mm,same size as raspberry pi 3
+
| Sizes ||  
 
|-
 
|-
−
| Weight || 40g
+
| Weight || 80g
 
|-  
 
|-  
 
|}
 
|}

Revision as of 00:12, 24 July 2018

Introduction

Overview:BPI-F2 with freescale IMX6
Overview:BPI-F2 with freescale IMX6

Key Features

Getting Start

Hardware

Hardware interfact

Hardware spec

HardWare Specification of Banana pi BPI-F2
Soc with freescale IMX6
CPU
GPU
SDRAM
SATA support 1*SATA interface
GPIO 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
On board Network 10/100/1000Mbps Ethernet \(Realtek RTL8211E/D\)
Wifi Module
Bluetooth
On board Storage MicroSD \(TF\) card,8G eMMC onboard (option 8-64G)
Display
Video
Audio outputs
Camera
Audio input
USB
Buttons
Leds
IR No onboard IR receiver
DC Power 5V/2A with micro USB port
battery No 3.7V lithium battery power support
Sizes
Weight 80g
Retrieved from "https://wiki.banana-pi.org/index.php?title=Banana_Pi_BPI-F2&oldid=3641"