Difference between revisions of "BPI-R64 + MT7615 function test"

From Banana Pi Wiki
Jump to: navigation, search
(performance test)
(功耗测试)
Line 68: Line 68:
 
[[File:7615_test_10.jpg]]
 
[[File:7615_test_10.jpg]]
  
=功耗测试=
+
=power consumption testing=
  
DC直流电源设置为12V输出
+
The dc power supply is set to 12V output
  
6.1.BPI-R64上电后,330mA
+
6.1.when BPI-R64 power,330mA
  
 
[[File:7615_test_11.jpg]]
 
[[File:7615_test_11.jpg]]
  
6.2.打开MT7615并且笔记本连接wifi后,390mA
+
6.2.when open MT7615 anc pc connect wifi,390mA
  
 
[[File:7615_test_12.jpg]]
 
[[File:7615_test_12.jpg]]
  
6.3.iperf测试时,480mA
+
6.3.when iperf test speed,480mA
  
 
[[File:7615_test_13.jpg]]
 
[[File:7615_test_13.jpg]]

Revision as of 00:23, 11 April 2020

BPI-R64+MT7615 test wifi function with openwrt

Test environment and software

List of items required

1.1.BPI-R64
1.2.BPI-MT7615 module
1.3.12V/2A adapter
1.4.USB serial port line(3.3V)
1.5.TF card
1.6.5.8GHz wifi antenna,1-4 pcs
1.7.Openwrt image; http://wiki.banana-pi.org/Banana_Pi_BPI-R64#Release

Environment set up

2.use tooling(windows Win32DiskImager)burn BPI-R64 openwrt image to TF card,Then insert the TF card slot;MT7615 module insert to BPI-R64 mPCIe interface CN25,connect UART debug line and wifi antenna, then power on to boot.

7615 test 1.jpg

Configure Network

3.When the boot is complete, type in the serial port : ifconfig rai0 up to boot MT7615 Then configure rai0 IP address,such as :ifconfig rai0 192.168.11.11


7615 test 2.png

7615 test 14.png


4.use PC to connect MTK_AP2 SSID,Then configure the IP manually

7615 test 3.jpg

performance test

Since there is only one antenna for wifi, the connection speed is only 433Mbps. During the test, there are no walls or other barriers between the notebook and MT7615, and MT7615 is in the channel with less interference.

7615 test 4.png

0.5 meter distance test

5.1.Distance 0.5 m test: MT7615 distance 0.5 m from laptop 5.1.1.signal strength

7615 test 5.jpg

5.1.2.iperf speed test

7615 test 6.jpg

5 speed distance test

5.2.1.signal strength

7615 test 7.jpg

5.2.2.iperf speed test

7615 test 8.png

10 speed distance test

5.3.1.signal strength

7615 test 9.jpg

5.3.2.iperf speed test

7615 test 10.jpg

power consumption testing

The dc power supply is set to 12V output

6.1.when BPI-R64 power,330mA

7615 test 11.jpg

6.2.when open MT7615 anc pc connect wifi,390mA

7615 test 12.jpg

6.3.when iperf test speed,480mA

7615 test 13.jpg