Difference between revisions of "BPI-EAI80 Compiling Steps"

From Banana Pi Wiki
Jump to: navigation, search
Line 1: Line 1:
[[File:Banana_PI_BPI-EAI80_5.JPG|thumb|[[BPI-EAI80 AIoT board]] Gree EAI80 chip design]]
=BPI-EAI80 Compiling Steps=
=BPI-EAI80 Compiling Steps=

Revision as of 02:47, 13 October 2020

BPI-EAI80 AIoT board Gree EAI80 chip design

BPI-EAI80 Compiling Steps

Compiling LCD source code

Step 1: Hardware connection

1. Connect a 7” LCD cable with a EAI80
2. Connect a battery cable with a EAI80
3. Connect a type C cable with a NB

Burn 9.jpg

Step 2: Modify LCD source code

1.Go to src under lcd folder
2.Copy main.c file to another folder before modifying its context

Comple 1.jpg

3.Modifying lcd source code – main.c (under lcd src folder) then saving

Comple 2.jpg

Comple 3.jpg

Step 3: Execute compiling

1.Turn on a terminal, path: github/BPI-EAI80-bsp/ugelis/ugelis_example/example/driver_example/lcd/build)
2.Command: make (execute comiling)

Comple 4.jpg

Burning ugelis.bin (after compiling) to EAI80 flash

Step 1:

Turn on a terminal, seek ugelis file under lcd, go to below path:

Burn 6.jpg

Step 2:

Turn on 2nd terminal, go to below path: github/BPI-EAI80-bsp/ugelis/tools/gree_tool$

Burn 7.jpg

Step 3:

Copy ugelis.bin file under lcd/build/ugelis to gree_tools folder

Burn 3.jpg

Step 4:

Command: gree_tool$./gree_tool.ph (burning ugelis.bin file to EAI80 flash and lcd software burning done)

Burn 8.jpg

Burn 9.jpg