Difference between revisions of "BPI-EAI80 Compiling Steps"

From Banana Pi Wiki
Jump to: navigation, search
Line 19: Line 19:
  
 
[[File:Comple_2.jpg]]
 
[[File:Comple_2.jpg]]
 +
 +
[[File:Comple_3.jpg]]
  
  
 
Step 3: Execute compiling
 
Step 3: Execute compiling
1.Turn on a terminal, path: github/BPI-EAI80-bsp/ugelis/ugelis_example/example/driver_example/lcd/build)
+
::1.Turn on a terminal, path: github/BPI-EAI80-bsp/ugelis/ugelis_example/example/driver_example/lcd/build)
2.Command: make (execute comiling)
+
::2.Command: make (execute comiling)
  
 
Step 4: Burning ugelis.bin (after compiling) to EAI80 flash:
 
Step 4: Burning ugelis.bin (after compiling) to EAI80 flash:

Revision as of 03:07, 13 October 2020

BPI-EAI80 Compiling Steps

Compiling LCD source code

Step 1: Hardware connection

1. Connect a 7” LCD cable with a EAI80
2. Connect a battery cable with a EAI80
3. Connect a type C cable with a NB

Burn 9.jpg

Step 2: Modify LCD source code

1.Go to src under lcd folder
2.Copy main.c file to another folder before modifying its context

Comple 1.jpg

3.Modifying lcd source code – main.c (under lcd src folder) then saving

Comple 2.jpg

Comple 3.jpg


Step 3: Execute compiling

1.Turn on a terminal, path: github/BPI-EAI80-bsp/ugelis/ugelis_example/example/driver_example/lcd/build)
2.Command: make (execute comiling)

Step 4: Burning ugelis.bin (after compiling) to EAI80 flash: 1.Turn on 2nd terminal, path: github/BPI-EAI80-bsp/ugelis_example/example/driver_example/lcd/build/ugeliss 2. Turn on 3rd terminal, path: github/BPI-EAI80-bsp/ugelis/tools/gree_tool$

3. Copy ugelis.bin file under lcd/build/ugelis to gree_tools folder

4. Command: gree_tool$./gree_tool.ph (burning ugelis.bin file to EAI80 flash and lcd software burning done)