2 ESPBlocks Beginner's only

From Banana Pi Wiki
Revision as of 00:16, 18 February 2019 by Sinovoip (talk | contribs) (Use Blockly to run the program)
Jump to: navigation, search

Program with ESPBlocks

The development tools

Connect the board

  • Windows for example, in any location directly run, it is recommended that there is no Chinese path.
  • Double-click to open ESPblocks. Exe and wait for a moment while it releases the resource
  • Whether or not there is a Connect board, the Connect search board will pop up once, or you can click on the Connect to pop up the window.

Index (1).png

  • Now we connect the board through the wire, it will automatically find the current connected board serial port and display, as shown in the figure below.

Search.png

  • Then click the button in the figure to confirm that it is their own board can be connected.
  • the connection is completed as shown below:

Connected (1).png

  • Wireless connection is not supported now

Use the Editor to run the program

  • Prepare a piece of code and copy it into the white box.
print('\n')
print('test')
print('\n')

Ready (1).png

  • Click the Run button to complete the Run

Running.png

Use Blockly to run the program

  • Follow the arrows in the figure below.

Blockly.png

  • When you click the Blockly button in the menu, a fixed size window pops up. This function cannot be reused at present, so you need to close the program to use it again.
  • Select one of the display interface blocks in Blockly and it will appear synchronously in the edit box on the right, but you cannot edit code in Blockly mode.

Blockly1.png